APRS.ro MAP

Reset

reset

SR5WOT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5WOT-1. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1737156888	69 Pkt	0 Pkt	0 Pkt	-41 dBm	14.07 V
1737156278	61 Pkt	0 Pkt	2 Pkt	-37 dBm	14.05 V
1737155668	64 Pkt	0 Pkt	1 Pkt	-44 dBm	14.09 V
1737155058	58 Pkt	0 Pkt	1 Pkt	-35 dBm	14.09 V
1737154448	60 Pkt	0 Pkt	1 Pkt	-38 dBm	14.11 V
1737153838	7 Pkt	0 Pkt	0 Pkt	-40 dBm	14.09 V
1737150373	92 Pkt	3 Pkt	0 Pkt	-36 dBm	14.09 V
1737149763	80 Pkt	0 Pkt	1 Pkt	-39 dBm	14.07 V
1737149153	100 Pkt	2 Pkt	0 Pkt	-36 dBm	14.09 V
1737148543	86 Pkt	0 Pkt	0 Pkt	-40 dBm	14.11 V
1737147933	12 Pkt	0 Pkt	0 Pkt	-33 dBm	14.09 V
1737147708	75 Pkt	1 Pkt	0 Pkt	-39 dBm	14.09 V
1737147098	78 Pkt	0 Pkt	0 Pkt	-35 dBm	14.09 V
1737146488	68 Pkt	0 Pkt	0 Pkt	-35 dBm	14.07 V
1737145878	100 Pkt	0 Pkt	0 Pkt	-37 dBm	14.09 V
1737145268	102 Pkt	4 Pkt	0 Pkt	-30 dBm	14.07 V
1737144658	92 Pkt	2 Pkt	0 Pkt	-33 dBm	14.09 V
1737144047	83 Pkt	0 Pkt	0 Pkt	-27 dBm	14.09 V
1737143437	86 Pkt	0 Pkt	2 Pkt	-33 dBm	14.09 V
1737142827	14 Pkt	0 Pkt	0 Pkt	-26 dBm	14.11 V
1737142306	72 Pkt	0 Pkt	0 Pkt	-24 dBm	14.09 V
1737141696	90 Pkt	2 Pkt	0 Pkt	-31 dBm	14.09 V
1737141086	83 Pkt	4 Pkt	0 Pkt	-24 dBm	14.07 V
1737140476	87 Pkt	0 Pkt	3 Pkt	-28 dBm	14.09 V
1737139866	109 Pkt	1 Pkt	1 Pkt	-28 dBm	14.09 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)