This is the latest recevied telemetry packets stored in our database for station/object DB0EIR-15. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1737242131 | 20.5 deg C | 34 % | 0 | 0 | 0 |
1737241231 | 20.5 deg C | 34 % | 0 | 0 | 0 |
1737240331 | 20.6 deg C | 33.9 % | 0 | 0 | 0 |
1737240001 | 20.6 deg C | 34 % | 0 | 0 | 0 |
1737239101 | 20.7 deg C | 33.9 % | 0 | 0 | 0 |
1737238201 | 20.7 deg C | 33.8 % | 0 | 0 | 0 |
1737237301 | 20.8 deg C | 33.8 % | 0 | 0 | 0 |
1737236401 | 20.9 deg C | 33.7 % | 0 | 0 | 0 |
1737235501 | 21 deg C | 33.6 % | 0 | 0 | 0 |
1737234601 | 21.1 deg C | 33.6 % | 0 | 0 | 0 |
1737233701 | 21.1 deg C | 33.4 % | 0 | 0 | 0 |
1737232801 | 21.2 deg C | 33.3 % | 0 | 0 | 0 |
1737231901 | 21.3 deg C | 33.2 % | 0 | 0 | 0 |
1737231001 | 21.4 deg C | 33.1 % | 0 | 0 | 0 |
1737230100 | 21.5 deg C | 33 % | 0 | 0 | 0 |
1737229200 | 21.7 deg C | 32.8 % | 0 | 0 | 0 |
1737228300 | 21.8 deg C | 32.7 % | 0 | 0 | 0 |
1737227968 | 21.8 deg C | 32.8 % | 0 | 0 | 0 |
1737227068 | 21.9 deg C | 32.8 % | 0 | 0 | 0 |
1737226168 | 21.9 deg C | 32.7 % | 0 | 0 | 0 |
1737225268 | 21.8 deg C | 32.7 % | 0 | 0 | 0 |
1737224368 | 21.9 deg C | 32.7 % | 0 | 0 | 0 |
1737223468 | 21.8 deg C | 32.7 % | 0 | 0 | 0 |
1737222568 | 21.8 deg C | 32.8 % | 0 | 0 | 0 |
1737221668 | 21.8 deg C | 32.7 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)