APRS.ro MAP

Reset

reset

SP8EBC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8EBC-2. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*	Digi10min*	srvrTimeout*	Uptime*
1737244563	42 Pkt	2 Pkt	1 Pkt	24 Cnt	1 Hours
1737243963	52 Pkt	1 Pkt	0 Pkt	20 Cnt	0 Hours
1737243363	38 Pkt	2 Pkt	1 Pkt	16 Cnt	0 Hours
1737242763	67 Pkt	1 Pkt	0 Pkt	12 Cnt	0 Hours
1737242163	62 Pkt	4 Pkt	0 Pkt	8 Cnt	0 Hours
1737241563	67 Pkt	1 Pkt	0 Pkt	4 Cnt	0 Hours
1737240526	69 Pkt	1 Pkt	0 Pkt	24 Cnt	1 Hours
1737239926	76 Pkt	7 Pkt	6 Pkt	20 Cnt	0 Hours
1737239326	60 Pkt	3 Pkt	2 Pkt	16 Cnt	0 Hours
1737238726	59 Pkt	3 Pkt	2 Pkt	12 Cnt	0 Hours
1737238126	58 Pkt	5 Pkt	1 Pkt	8 Cnt	0 Hours
1737237526	89 Pkt	4 Pkt	3 Pkt	4 Cnt	0 Hours
1737236487	56 Pkt	2 Pkt	1 Pkt	24 Cnt	1 Hours
1737235887	68 Pkt	1 Pkt	0 Pkt	20 Cnt	0 Hours
1737235287	59 Pkt	3 Pkt	2 Pkt	16 Cnt	0 Hours
1737234687	49 Pkt	1 Pkt	0 Pkt	12 Cnt	0 Hours
1737234088	64 Pkt	4 Pkt	0 Pkt	8 Cnt	0 Hours
1737233487	81 Pkt	3 Pkt	2 Pkt	4 Cnt	0 Hours
1737232450	55 Pkt	2 Pkt	1 Pkt	24 Cnt	1 Hours
1737231850	74 Pkt	4 Pkt	3 Pkt	20 Cnt	0 Hours
1737231250	73 Pkt	3 Pkt	2 Pkt	16 Cnt	0 Hours
1737230650	87 Pkt	11 Pkt	10 Pkt	12 Cnt	0 Hours
1737230050	81 Pkt	8 Pkt	4 Pkt	8 Cnt	0 Hours
1737229450	61 Pkt	3 Pkt	2 Pkt	4 Cnt	0 Hours
1737228413	85 Pkt	5 Pkt	4 Pkt	24 Cnt	1 Hours

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

srvrTimeout: 0, 1, 0

Uptime: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)