APRS.ro MAP

Reset

reset

TA1NI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1NI-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1737224561	91 Pkt	7 Pkt	4 Pkt	-51 dBm	0.04 V
1737223831	110 Pkt	8 Pkt	7 Pkt	-52 dBm	0.04 V
1737223101	84 Pkt	10 Pkt	3 Pkt	-58 dBm	0.04 V
1737222371	92 Pkt	8 Pkt	5 Pkt	-58 dBm	0.04 V
1737221641	107 Pkt	8 Pkt	6 Pkt	-57 dBm	0.04 V
1737220911	100 Pkt	6 Pkt	6 Pkt	-52 dBm	0.02 V
1737220181	81 Pkt	4 Pkt	7 Pkt	-55 dBm	0.04 V
1737219451	10 Pkt	0 Pkt	0 Pkt	-50 dBm	0.04 V
1737218645	83 Pkt	23 Pkt	5 Pkt	-57 dBm	0.04 V
1737217915	92 Pkt	25 Pkt	6 Pkt	-54 dBm	0.02 V
1737217185	102 Pkt	13 Pkt	2 Pkt	-60 dBm	0.04 V
1737216455	98 Pkt	15 Pkt	5 Pkt	-54 dBm	0.04 V
1737215725	111 Pkt	16 Pkt	1 Pkt	-52 dBm	0.04 V
1737214995	95 Pkt	14 Pkt	2 Pkt	-53 dBm	0.04 V
1737214265	98 Pkt	13 Pkt	5 Pkt	-55 dBm	0.04 V
1737213535	105 Pkt	17 Pkt	1 Pkt	-56 dBm	0.04 V
1737212805	102 Pkt	13 Pkt	4 Pkt	-52 dBm	0.02 V
1737212075	100 Pkt	20 Pkt	1 Pkt	-51 dBm	0.04 V
1737211345	90 Pkt	11 Pkt	7 Pkt	-55 dBm	0.04 V
1737210615	114 Pkt	18 Pkt	4 Pkt	-55 dBm	0.04 V
1737209885	83 Pkt	13 Pkt	5 Pkt	-54 dBm	0.04 V
1737209155	122 Pkt	16 Pkt	2 Pkt	-53 dBm	0.04 V
1737208425	106 Pkt	14 Pkt	4 Pkt	-54 dBm	0.04 V
1737207695	87 Pkt	14 Pkt	2 Pkt	-53 dBm	0.02 V
1737206965	104 Pkt	17 Pkt	6 Pkt	-51 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)