This is the latest recevied telemetry packets stored in our database for station/object DH9ZIG-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1737244010 | 0.2 deg C | 83.2 % | 1028.9 hPa | 0 | 0 |
| 1737243110 | 0.1 deg C | 83.3 % | 1029.1 hPa | 0 | 0 |
| 1737242210 | 0.1 deg C | 83.1 % | 1029 hPa | 0 | 0 |
| 1737240410 | 0.3 deg C | 82.5 % | 1029.2 hPa | 0 | 0 |
| 1737239510 | 0.3 deg C | 82.8 % | 1029.3 hPa | 0 | 0 |
| 1737218808 | 0.1 deg C | 83 % | 1031.2 hPa | 0 | 0 |
| 1737217909 | 0.1 deg C | 82.6 % | 1031.3 hPa | 0 | 0 |
| 1737217008 | 0.3 deg C | 81.6 % | 1031.4 hPa | 0 | 0 |
| 1737216108 | 0.7 deg C | 80 % | 1031.3 hPa | 0 | 0 |
| 1737215208 | 0.7 deg C | 79.7 % | 1031.2 hPa | 0 | 0 |
| 1737214308 | 0.6 deg C | 79.6 % | 1031.2 hPa | 0 | 0 |
| 1737213408 | 0.9 deg C | 78.5 % | 1031.1 hPa | 0 | 0 |
| 1737212508 | 1.1 deg C | 77.7 % | 1030.9 hPa | 0 | 0 |
| 1737211608 | 1.5 deg C | 76.8 % | 1030.6 hPa | 0 | 0 |
| 1737210708 | 2 deg C | 74.7 % | 1030.7 hPa | 0 | 0 |
| 1737209807 | 2.7 deg C | 72 % | 1030.9 hPa | 0 | 0 |
| 1737208909 | 3 deg C | 71.5 % | 1031 hPa | 0 | 0 |
| 1737208007 | 2.7 deg C | 71.3 % | 1031.4 hPa | 0 | 0 |
| 1737207107 | 2.8 deg C | 71.8 % | 1031.5 hPa | 0 | 0 |
| 1737206207 | 2.2 deg C | 72.8 % | 1031.9 hPa | 0 | 0 |
| 1737205307 | 2.8 deg C | 71.5 % | 1031.9 hPa | 0 | 0 |
| 1737204407 | 1.9 deg C | 73.5 % | 1032.2 hPa | 0 | 0 |
| 1737203507 | 2.6 deg C | 72.4 % | 1032.2 hPa | 0 | 0 |
| 1737202607 | 1.6 deg C | 75.4 % | 1032.6 hPa | 0 | 0 |
| 1737201707 | 1.9 deg C | 73.1 % | 1032.6 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)