APRS.ro MAP

Reset

reset

MB7UAL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object MB7UAL. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	CabT*
1737257307	13.88 Volt	250 Pkt	100 Pcnt	140 c
1737256407	13.88 Volt	260 Pkt	100 Pcnt	140 c
1737255507	13.88 Volt	250 Pkt	99 Pcnt	140 c
1737254607	13.88 Volt	260 Pkt	99 Pcnt	141 c
1737253707	13.88 Volt	250 Pkt	99 Pcnt	141 c
1737252807	13.88 Volt	250 Pkt	98 Pcnt	141 c
1737251907	13.88 Volt	250 Pkt	98 Pcnt	141 c
1737251007	13.88 Volt	250 Pkt	98 Pcnt	141 c
1737250107	13.88 Volt	260 Pkt	98 Pcnt	141 c
1737249207	13.88 Volt	260 Pkt	98 Pcnt	141 c
1737248307	13.88 Volt	270 Pkt	98 Pcnt	141 c
1737247407	13.88 Volt	280 Pkt	99 Pcnt	141 c
1737246507	13.88 Volt	270 Pkt	99 Pcnt	141 c
1737245607	13.88 Volt	270 Pkt	98 Pcnt	141 c
1737244707	13.88 Volt	260 Pkt	98 Pcnt	141 c
1737243807	13.88 Volt	260 Pkt	99 Pcnt	141 c
1737242908	13.88 Volt	260 Pkt	99 Pcnt	142 c
1737242008	13.88 Volt	260 Pkt	100 Pcnt	142 c
1737241108	13.88 Volt	270 Pkt	99 Pcnt	142 c
1737240208	13.88 Volt	280 Pkt	99 Pcnt	142 c
1737239308	13.88 Volt	280 Pkt	99 Pcnt	142 c
1737238408	13.88 Volt	280 Pkt	99 Pcnt	142 c
1737237508	13.88 Volt	280 Pkt	100 Pcnt	142 c
1737236608	13.88 Volt	290 Pkt	100 Pcnt	142 c
1737235708	13.88 Volt	280 Pkt	100 Pcnt	142 c

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

CabT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)