This is the latest recevied telemetry packets stored in our database for station/object DK9PS-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1738309309 | 20.2 deg C | 40.3 % | 0 | 0 | 0 |
| 1738308409 | 19.8 deg C | 41.2 % | 0 | 0 | 0 |
| 1738307509 | 19.4 deg C | 43.5 % | 0 | 0 | 0 |
| 1738306609 | 18.8 deg C | 42.5 % | 0 | 0 | 0 |
| 1738305709 | 18.6 deg C | 42.4 % | 0 | 0 | 0 |
| 1738304809 | 18.6 deg C | 42.6 % | 0 | 0 | 0 |
| 1738303909 | 18.8 deg C | 42.5 % | 0 | 0 | 0 |
| 1738303008 | 18.9 deg C | 42.6 % | 0 | 0 | 0 |
| 1738302694 | 19 deg C | 42.5 % | 0 | 0 | 0 |
| 1738301794 | 19.2 deg C | 42 % | 0 | 0 | 0 |
| 1738300894 | 19.3 deg C | 41.5 % | 0 | 0 | 0 |
| 1738299994 | 19.3 deg C | 41.6 % | 0 | 0 | 0 |
| 1738299094 | 19.3 deg C | 41.7 % | 0 | 0 | 0 |
| 1738298194 | 19.4 deg C | 41.5 % | 0 | 0 | 0 |
| 1738297294 | 19.5 deg C | 41.4 % | 0 | 0 | 0 |
| 1738296394 | 19.4 deg C | 41.6 % | 0 | 0 | 0 |
| 1738295493 | 19.3 deg C | 42 % | 0 | 0 | 0 |
| 1738294593 | 19.1 deg C | 42.3 % | 0 | 0 | 0 |
| 1738293693 | 19 deg C | 42.6 % | 0 | 0 | 0 |
| 1738292793 | 18.9 deg C | 42.9 % | 0 | 0 | 0 |
| 1738291893 | 19 deg C | 42.9 % | 0 | 0 | 0 |
| 1738290978 | 19 deg C | 42.8 % | 0 | 0 | 0 |
| 1738290645 | 19 deg C | 42.9 % | 0 | 0 | 0 |
| 1738289745 | 19.1 deg C | 42.9 % | 0 | 0 | 0 |
| 1738288845 | 19.2 deg C | 42.7 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)