APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

OZ7CER-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OZ7CER-1. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732221423	13.9 Volt	240 Pkt	90 Pkt	56 Pcnt
1732221422	13.9 Volt	240 Pkt	90 Pkt	56 Pcnt
1732221126	13.9 Volt	240 Pkt	90 Pkt	56 Pcnt
1732221122	13.9 Volt	240 Pkt	90 Pkt	56 Pcnt
1732220822	13.9 Volt	220 Pkt	80 Pkt	54 Pcnt
1732220822	13.9 Volt	220 Pkt	80 Pkt	54 Pcnt
1732220524	13.9 Volt	230 Pkt	90 Pkt	51 Pcnt
1732220521	13.9 Volt	230 Pkt	90 Pkt	51 Pcnt
1732220222	13.9 Volt	220 Pkt	90 Pkt	49 Pcnt
1732220221	13.9 Volt	220 Pkt	90 Pkt	49 Pcnt
1732219921	13.9 Volt	220 Pkt	90 Pkt	48 Pcnt
1732219921	13.9 Volt	220 Pkt	90 Pkt	48 Pcnt
1732219621	13.9 Volt	210 Pkt	80 Pkt	46 Pcnt
1732219620	13.9 Volt	210 Pkt	80 Pkt	46 Pcnt
1732219321	13.9 Volt	220 Pkt	80 Pkt	46 Pcnt
1732219320	13.9 Volt	220 Pkt	80 Pkt	46 Pcnt
1732219021	13.9 Volt	210 Pkt	80 Pkt	45 Pcnt
1732219020	13.9 Volt	210 Pkt	80 Pkt	45 Pcnt
1732218720	13.9 Volt	220 Pkt	80 Pkt	45 Pcnt
1732218720	13.9 Volt	220 Pkt	80 Pkt	45 Pcnt
1732218420	13.9 Volt	210 Pkt	70 Pkt	44 Pcnt
1732218419	13.9 Volt	210 Pkt	70 Pkt	44 Pcnt
1732218120	13.9 Volt	220 Pkt	80 Pkt	44 Pcnt
1732218119	13.9 Volt	220 Pkt	80 Pkt	44 Pcnt
1732217819	13.9 Volt	210 Pkt	80 Pkt	44 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)