APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

HB9HSN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9HSN-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V.in*	Rx.1h*	Eff.1h*	Temp*
1732288439	12.15 Volt	110 Pkt	72 Pcnt	31 C
1732288139	12.15 Volt	120 Pkt	75 Pcnt	31 C
1732287839	12.15 Volt	120 Pkt	74 Pcnt	31 C
1732287539	12.15 Volt	110 Pkt	72 Pcnt	31 C
1732287239	12.15 Volt	100 Pkt	72 Pcnt	31 C
1732286939	12.15 Volt	110 Pkt	74 Pcnt	31 C
1732286639	12.15 Volt	100 Pkt	71 Pcnt	30.5 C
1732286339	12.15 Volt	100 Pkt	74 Pcnt	30.5 C
1732286039	12.15 Volt	100 Pkt	74 Pcnt	31 C
1732285739	12.15 Volt	110 Pkt	75 Pcnt	31 C
1732285439	12.15 Volt	100 Pkt	77 Pcnt	31 C
1732285139	12.15 Volt	110 Pkt	76 Pcnt	30.5 C
1732284839	12.15 Volt	100 Pkt	75 Pcnt	31 C
1732284539	12.15 Volt	110 Pkt	73 Pcnt	30.5 C
1732284239	12.15 Volt	110 Pkt	73 Pcnt	31 C
1732283939	12.15 Volt	120 Pkt	74 Pcnt	31 C
1732283639	12.15 Volt	120 Pkt	76 Pcnt	30.5 C
1732283339	12.15 Volt	130 Pkt	76 Pcnt	31 C
1732283039	12.15 Volt	120 Pkt	75 Pcnt	30.5 C
1732282739	12.15 Volt	130 Pkt	76 Pcnt	31 C
1732282439	12.15 Volt	140 Pkt	78 Pcnt	31 C
1732282139	12.15 Volt	140 Pkt	77 Pcnt	31 C
1732281839	12.15 Volt	130 Pkt	77 Pcnt	31 C
1732281539	12.15 Volt	130 Pkt	77 Pcnt	30.5 C
1732281239	12.15 Volt	130 Pkt	76 Pcnt	31 C

*Used Equation Coefficients:

V.in: 0, 0.075, 0

Rx.1h: 0, 10, 0

Dg.1h: 0, 10, 0

Eff.1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)