This is the latest recevied telemetry packets stored in our database for station/object IU5JJW-3. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | Vbat* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732304079 | -39 dbm | 12.81 V | 0 | 0 | 0 |
| 1732303479 | -40 dbm | 12.81 V | 0 | 0 | 0 |
| 1732302879 | -39 dbm | 12.79 V | 0 | 0 | 0 |
| 1732302279 | -39 dbm | 12.84 V | 0 | 0 | 0 |
| 1732301679 | -39 dbm | 12.84 V | 0 | 0 | 0 |
| 1732301079 | -40 dbm | 12.84 V | 0 | 0 | 0 |
| 1732300479 | -39 dbm | 12.84 V | 0 | 0 | 0 |
| 1732299880 | -39 dbm | 12.85 V | 0 | 0 | 0 |
| 1732299279 | -40 dbm | 12.87 V | 0 | 0 | 0 |
| 1732298679 | -39 dbm | 12.87 V | 0 | 0 | 0 |
| 1732298079 | -38 dbm | 12.87 V | 0 | 0 | 0 |
| 1732297479 | -40 dbm | 12.87 V | 0 | 0 | 0 |
| 1732296879 | -40 dbm | 12.87 V | 0 | 0 | 0 |
| 1732296279 | -40 dbm | 12.87 V | 0 | 0 | 0 |
| 1732295679 | -40 dbm | 12.88 V | 0 | 0 | 0 |
| 1732295079 | -39 dbm | 12.88 V | 0 | 0 | 0 |
| 1732294479 | -39 dbm | 12.88 V | 0 | 0 | 0 |
| 1732293879 | -39 dbm | 12.9 V | 0 | 0 | 0 |
| 1732293279 | -40 dbm | 12.9 V | 0 | 0 | 0 |
| 1732292679 | -40 dbm | 12.92 V | 0 | 0 | 0 |
| 1732292079 | -40 dbm | 12.9 V | 0 | 0 | 0 |
| 1732291479 | -40 dbm | 12.92 V | 0 | 0 | 0 |
| 1732290879 | -40 dbm | 12.95 V | 0 | 0 | 0 |
| 1732290279 | -40 dbm | 12.95 V | 0 | 0 | 0 |
| 1732289679 | -37 dbm | 12.96 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
Vbat: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)