APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

SR8ULZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8ULZ. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732275355	13.65 Volt	660 Pkt	10 Pkt	87 Pcnt
1732274455	13.73 Volt	640 Pkt	10 Pkt	87 Pcnt
1732273554	13.73 Volt	600 Pkt	10 Pkt	87 Pcnt
1732272653	13.73 Volt	620 Pkt	10 Pkt	87 Pcnt
1732271752	13.65 Volt	660 Pkt	10 Pkt	85 Pcnt
1732270851	13.73 Volt	650 Pkt	10 Pkt	86 Pcnt
1732269950	13.73 Volt	650 Pkt	10 Pkt	85 Pcnt
1732269049	13.73 Volt	610 Pkt	10 Pkt	84 Pcnt
1732268149	13.73 Volt	560 Pkt	10 Pkt	84 Pcnt
1732267248	13.73 Volt	560 Pkt	10 Pkt	83 Pcnt
1732266347	13.73 Volt	550 Pkt	10 Pkt	83 Pcnt
1732265446	13.73 Volt	590 Pkt	10 Pkt	84 Pcnt
1732264545	13.73 Volt	640 Pkt	10 Pkt	83 Pcnt
1732263644	13.73 Volt	640 Pkt	10 Pkt	83 Pcnt
1732262744	13.73 Volt	640 Pkt	10 Pkt	81 Pcnt
1732261843	13.73 Volt	650 Pkt	10 Pkt	81 Pcnt
1732260942	13.73 Volt	610 Pkt	10 Pkt	80 Pcnt
1732260041	13.73 Volt	610 Pkt	10 Pkt	82 Pcnt
1732259140	13.73 Volt	600 Pkt	10 Pkt	83 Pcnt
1732258240	13.73 Volt	550 Pkt	10 Pkt	80 Pcnt
1732257338	13.73 Volt	520 Pkt	10 Pkt	82 Pcnt
1732256437	13.73 Volt	500 Pkt	10 Pkt	82 Pcnt
1732255537	13.73 Volt	510 Pkt	10 Pkt	83 Pcnt
1732254636	13.73 Volt	510 Pkt	10 Pkt	85 Pcnt
1732253735	13.73 Volt	540 Pkt	10 Pkt	85 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)