APRS.ro MAP

Reset

reset

9A7KXP-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-3. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX 1h*	AKU +/-*	Akumul*	PV in*	Temp*
1732507901	1030 Paket	3.32 A--48V	51.98 Volt	0.2 A--48V	6.5 C
1732507900	1030 Paket	3.32 A--48V	51.98 Volt	0.2 A--48V	6.5 C
1732507600	1000 Paket	3.32 A--48V	51.98 Volt	0.2 A--48V	6.5 C
1732507299	1000 Paket	3.32 A--48V	51.98 Volt	0.2 A--48V	6.5 C
1732506999	990 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732506699	970 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732506399	960 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732506099	980 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732506098	980 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732505798	1000 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732505498	990 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732505197	990 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732504897	980 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732504597	990 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732504297	990 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732504297	990 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732503996	990 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732503696	990 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732503396	980 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732503095	990 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732502795	970 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732502495	960 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732502495	960 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732502195	960 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C
1732501894	970 Paket	3.32 A--48V	51.5 Volt	0.2 A--48V	6.5 C

*Used Equation Coefficients:

RX 1h: 0, 10, 0

AKU +/-: 0, 0.1953, -24.8031

Akumul: 0, 0.4716, 0.1

PV in: 0, 0.1953, -24.8031

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)