This is the latest recevied telemetry packets stored in our database for station/object DK1IZ. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1738324451 | 24.7 deg C | 31.1 % | 0 | 0 | 0 |
| 1738323553 | 24.6 deg C | 31.5 % | 0 | 0 | 0 |
| 1738322650 | 24.7 deg C | 31.6 % | 0 | 0 | 0 |
| 1738321746 | 24.4 deg C | 31.7 % | 0 | 0 | 0 |
| 1738320841 | 24.3 deg C | 31.6 % | 0 | 0 | 0 |
| 1738319938 | 24.3 deg C | 31.1 % | 0 | 0 | 0 |
| 1738318144 | 24.6 deg C | 31 % | 0 | 0 | 0 |
| 1738317243 | 24.9 deg C | 30.8 % | 0 | 0 | 0 |
| 1738316348 | 25.4 deg C | 30.7 % | 0 | 0 | 0 |
| 1738315450 | 25.5 deg C | 30.7 % | 0 | 0 | 0 |
| 1738313652 | 25.3 deg C | 30.9 % | 0 | 0 | 0 |
| 1738312754 | 25.2 deg C | 30.9 % | 0 | 0 | 0 |
| 1738311849 | 25.1 deg C | 31.2 % | 0 | 0 | 0 |
| 1738310951 | 25 deg C | 31.1 % | 0 | 0 | 0 |
| 1738310052 | 24.8 deg C | 31.3 % | 0 | 0 | 0 |
| 1738308249 | 24.8 deg C | 31.3 % | 0 | 0 | 0 |
| 1738307349 | 24.8 deg C | 31.3 % | 0 | 0 | 0 |
| 1738306454 | 24.6 deg C | 31.6 % | 0 | 0 | 0 |
| 1738305549 | 24.4 deg C | 31.5 % | 0 | 0 | 0 |
| 1738304654 | 24 deg C | 31.6 % | 0 | 0 | 0 |
| 1738303757 | 23.4 deg C | 31.5 % | 0 | 0 | 0 |
| 1738302852 | 23.5 deg C | 31.8 % | 0 | 0 | 0 |
| 1738301955 | 23.2 deg C | 32.8 % | 0 | 0 | 0 |
| 1738300160 | 20.8 deg C | 35.9 % | 0 | 0 | 0 |
| 1738269757 | 25.7 deg C | 31.8 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)