APRS.ro MAP

Reset

reset

SR5SAN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5SAN. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1732522865	0.05 Rx Erlang	0.01 Tx Erlang	44 count/10m	1 count/10m	8 count/10m
1732521666	0.05 Rx Erlang	0.01 Tx Erlang	31 count/10m	1 count/10m	7 count/10m
1732520465	0.06 Rx Erlang	0.02 Tx Erlang	51 count/10m	1 count/10m	10 count/10m
1732519265	0.1 Rx Erlang	0.01 Tx Erlang	79 count/10m	3 count/10m	8 count/10m
1732518065	0.08 Rx Erlang	0.01 Tx Erlang	67 count/10m	2 count/10m	10 count/10m
1732516865	0.05 Rx Erlang	0.02 Tx Erlang	45 count/10m	2 count/10m	11 count/10m
1732515665	0.05 Rx Erlang	0.01 Tx Erlang	48 count/10m	2 count/10m	7 count/10m
1732514465	0.04 Rx Erlang	0.01 Tx Erlang	37 count/10m	1 count/10m	8 count/10m
1732513265	0.05 Rx Erlang	0.02 Tx Erlang	37 count/10m	1 count/10m	12 count/10m
1732512065	0.04 Rx Erlang	0.01 Tx Erlang	37 count/10m	1 count/10m	8 count/10m
1732510865	0.03 Rx Erlang	0.01 Tx Erlang	31 count/10m	1 count/10m	8 count/10m
1732509665	0.04 Rx Erlang	0.02 Tx Erlang	38 count/10m	2 count/10m	11 count/10m
1732508465	0.05 Rx Erlang	0.01 Tx Erlang	41 count/10m	2 count/10m	9 count/10m
1732507265	0.05 Rx Erlang	0.01 Tx Erlang	38 count/10m	2 count/10m	9 count/10m
1732506065	0.06 Rx Erlang	0.02 Tx Erlang	44 count/10m	2 count/10m	12 count/10m
1732504866	0.04 Rx Erlang	0.01 Tx Erlang	35 count/10m	2 count/10m	8 count/10m
1732503665	0.06 Rx Erlang	0.01 Tx Erlang	45 count/10m	3 count/10m	9 count/10m
1732502465	0.05 Rx Erlang	0.01 Tx Erlang	35 count/10m	2 count/10m	9 count/10m
1732501265	0.05 Rx Erlang	0.01 Tx Erlang	36 count/10m	1 count/10m	8 count/10m
1732500065	0.04 Rx Erlang	0.01 Tx Erlang	34 count/10m	1 count/10m	8 count/10m
1732498865	0.04 Rx Erlang	0.02 Tx Erlang	33 count/10m	2 count/10m	10 count/10m
1732497665	0.03 Rx Erlang	0.01 Tx Erlang	30 count/10m	1 count/10m	8 count/10m
1732496465	0.04 Rx Erlang	0.01 Tx Erlang	26 count/10m	2 count/10m	8 count/10m
1732495265	0.04 Rx Erlang	0.01 Tx Erlang	32 count/10m	2 count/10m	10 count/10m
1732494065	0.04 Rx Erlang	0.01 Tx Erlang	18 count/10m	1 count/10m	5 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)