APRS.ro MAP

Reset

reset

SR2ZFT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2ZFT. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1737202653	13.8 Volt	260 Pkt	120 Pkt	77 Pcnt
1737202054	13.8 Volt	250 Pkt	110 Pkt	77 Pcnt
1737201448	13.8 Volt	220 Pkt	90 Pkt	77 Pcnt
1737200847	13.8 Volt	230 Pkt	100 Pkt	79 Pcnt
1737200246	13.8 Volt	220 Pkt	90 Pkt	80 Pcnt
1737199668	13.8 Volt	230 Pkt	100 Pkt	80 Pcnt
1737199045	13.8 Volt	240 Pkt	110 Pkt	79 Pcnt
1737198482	13.8 Volt	250 Pkt	120 Pkt	81 Pcnt
1737197852	13.8 Volt	280 Pkt	150 Pkt	81 Pcnt
1737197277	13.8 Volt	270 Pkt	140 Pkt	79 Pcnt
1737196650	13.8 Volt	280 Pkt	160 Pkt	79 Pcnt
1737196044	13.8 Volt	270 Pkt	160 Pkt	81 Pcnt
1737195442	13.8 Volt	240 Pkt	160 Pkt	81 Pcnt
1737194842	13.8 Volt	230 Pkt	140 Pkt	82 Pcnt
1737194248	13.8 Volt	220 Pkt	130 Pkt	83 Pcnt
1737193642	13.8 Volt	240 Pkt	140 Pkt	86 Pcnt
1737193040	13.8 Volt	230 Pkt	130 Pkt	85 Pcnt
1737192466	13.8 Volt	210 Pkt	110 Pkt	83 Pcnt
1737191838	13.8 Volt	230 Pkt	110 Pkt	83 Pcnt
1737191237	13.8 Volt	220 Pkt	100 Pkt	84 Pcnt
1737190638	13.8 Volt	210 Pkt	100 Pkt	83 Pcnt
1737190046	13.8 Volt	170 Pkt	80 Pkt	80 Pcnt
1737189495	13.8 Volt	180 Pkt	80 Pkt	83 Pcnt
1737188837	13.8 Volt	190 Pkt	90 Pkt	81 Pcnt
1737188287	13.8 Volt	170 Pkt	80 Pkt	79 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)