This is the latest recevied telemetry packets stored in our database for station/object IR1CX-2. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx* | TxDigipeater* | Value3* | Vbatt* | Value5* |
|---|---|---|---|---|---|
| 1738300524 | 0 Pkt/10m | 0 Pkt/10m | 3.86 Volt | 0.3 Volt | -6.35 Ampere |
| 1738299928 | 11 Pkt/10m | 1 Pkt/10m | 3.88 Volt | 0.3 Volt | -6.35 Ampere |
| 1738299323 | 0 Pkt/10m | 0 Pkt/10m | 3.86 Volt | 0.3 Volt | -6.35 Ampere |
| 1738298727 | 17 Pkt/10m | 4 Pkt/10m | 3.86 Volt | 0.3 Volt | -6.35 Ampere |
| 1738298123 | 0 Pkt/10m | 0 Pkt/10m | 3.86 Volt | 0.3 Volt | -6.35 Ampere |
| 1738297526 | 20 Pkt/10m | 4 Pkt/10m | 3.84 Volt | 0.3 Volt | -6.35 Ampere |
| 1738296922 | 0 Pkt/10m | 0 Pkt/10m | 3.86 Volt | 0.3 Volt | -6.35 Ampere |
| 1738296325 | 14 Pkt/10m | 1 Pkt/10m | 3.88 Volt | 0.3 Volt | -6.35 Ampere |
| 1738295721 | 0 Pkt/10m | 0 Pkt/10m | 3.88 Volt | 0.3 Volt | -6.35 Ampere |
| 1738295124 | 20 Pkt/10m | 1 Pkt/10m | 3.86 Volt | 0.3 Volt | -6.35 Ampere |
| 1738294520 | 0 Pkt/10m | 0 Pkt/10m | 3.84 Volt | 0.3 Volt | -6.35 Ampere |
| 1738293924 | 19 Pkt/10m | 2 Pkt/10m | 3.86 Volt | 0.3 Volt | -6.35 Ampere |
| 1738293319 | 0 Pkt/10m | 0 Pkt/10m | 3.86 Volt | 0.3 Volt | -6.35 Ampere |
| 1738292723 | 11 Pkt/10m | 2 Pkt/10m | 3.84 Volt | 0.3 Volt | -6.35 Ampere |
| 1738291579 | 0 Pkt/10m | 0 Pkt/10m | 3.84 Volt | 0.3 Volt | -6.35 Ampere |
| 1738291522 | 14 Pkt/10m | 2 Pkt/10m | 3.88 Volt | 0.3 Volt | -6.35 Ampere |
| 1738290918 | 0 Pkt/10m | 0 Pkt/10m | 3.84 Volt | 0.3 Volt | -6.35 Ampere |
| 1738290321 | 21 Pkt/10m | 3 Pkt/10m | 3.86 Volt | 0.3 Volt | -6.35 Ampere |
| 1738289717 | 0 Pkt/10m | 0 Pkt/10m | 3.86 Volt | 0.3 Volt | -6.35 Ampere |
| 1738288891 | 18 Pkt/10m | 3 Pkt/10m | 3.84 Volt | 0.3 Volt | -6.35 Ampere |
| 1738288516 | 0 Pkt/10m | 0 Pkt/10m | 3.84 Volt | 0.3 Volt | -6.35 Ampere |
| 1738287927 | 18 Pkt/10m | 3 Pkt/10m | 3.84 Volt | 0.3 Volt | -6.35 Ampere |
| 1738287316 | 0 Pkt/10m | 0 Pkt/10m | 3.86 Volt | 0.3 Volt | -6.35 Ampere |
| 1738286719 | 24 Pkt/10m | 4 Pkt/10m | 3.88 Volt | 0.3 Volt | -6.35 Ampere |
| 1738286114 | 0 Pkt/10m | 0 Pkt/10m | 3.86 Volt | 0.3 Volt | -6.35 Ampere |
*Used Equation Coefficients:
Rx: 0, 1, 0
TxDigipeater: 0, 1, 0
Value3: 0, 0.0196, 0
Vbatt: 0, 0.1, 0
Value5: 0, 0.05, -6.35
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)