APRS.ro MAP

Reset

reset

TA5LVC-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA5LVC-11. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1738300252	11 Pkt	2 Pkt	1 Pkt	-53 dBm	21 V
1738299522	39 Pkt	4 Pkt	1 Pkt	-53 dBm	21 V
1738298792	26 Pkt	2 Pkt	0 Pkt	-54 dBm	21 V
1738298062	15 Pkt	4 Pkt	1 Pkt	-53 dBm	21 V
1738297332	35 Pkt	3 Pkt	1 Pkt	-53 dBm	21 V
1738296602	33 Pkt	3 Pkt	0 Pkt	-53 dBm	21 V
1738295872	18 Pkt	1 Pkt	0 Pkt	-53 dBm	21 V
1738295142	22 Pkt	4 Pkt	2 Pkt	-54 dBm	21 V
1738294412	22 Pkt	4 Pkt	1 Pkt	-53 dBm	21 V
1738293682	19 Pkt	1 Pkt	0 Pkt	-52 dBm	21 V
1738292952	22 Pkt	4 Pkt	1 Pkt	-52 dBm	21 V
1738292222	16 Pkt	3 Pkt	1 Pkt	-53 dBm	21 V
1738291492	14 Pkt	3 Pkt	2 Pkt	-52 dBm	21 V
1738290762	22 Pkt	3 Pkt	0 Pkt	-53 dBm	21 V
1738290032	17 Pkt	1 Pkt	0 Pkt	-53 dBm	21 V
1738289302	15 Pkt	6 Pkt	2 Pkt	-53 dBm	21 V
1738288572	19 Pkt	2 Pkt	0 Pkt	-53 dBm	21 V
1738287842	16 Pkt	1 Pkt	0 Pkt	-52 dBm	21 V
1738287112	19 Pkt	4 Pkt	1 Pkt	-53 dBm	21 V
1738286382	17 Pkt	3 Pkt	1 Pkt	-53 dBm	21 V
1738285652	18 Pkt	4 Pkt	0 Pkt	-53 dBm	21 V
1738284922	12 Pkt	2 Pkt	1 Pkt	-52 dBm	21 V
1738284192	18 Pkt	1 Pkt	0 Pkt	-53 dBm	21 V
1738283462	6 Pkt	4 Pkt	1 Pkt	-53 dBm	21 V
1738282732	23 Pkt	3 Pkt	1 Pkt	-53 dBm	21 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)