This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-EY. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Hmdt* | Baro* | RSSI* | Load* |
|---|---|---|---|---|---|
| 1732224927 | 13 C | 45.6 % | 1008.4 mbar | -47 dBm | 6 % |
| 1732224567 | 13 C | 45.6 % | 1008.4 mbar | -51 dBm | 6 % |
| 1732224207 | 13 C | 45.2 % | 1008.8 mbar | -46 dBm | 6 % |
| 1732223847 | 13 C | 45.2 % | 1008.8 mbar | -47 dBm | 6 % |
| 1732223487 | 13 C | 45.6 % | 1008.8 mbar | -47 dBm | 6 % |
| 1732223127 | 13 C | 45.6 % | 1008.4 mbar | -47 dBm | 6.4 % |
| 1732222767 | 13 C | 45.2 % | 1008.4 mbar | -47 dBm | 6.4 % |
| 1732222407 | 13 C | 45.2 % | 1008.4 mbar | -48 dBm | 6.4 % |
| 1732222047 | 13 C | 45.2 % | 1008.4 mbar | -46 dBm | 6.4 % |
| 1732221687 | 13 C | 45.2 % | 1008.4 mbar | -46 dBm | 6.4 % |
| 1732221327 | 13.5 C | 45.2 % | 1008.4 mbar | -47 dBm | 6 % |
| 1732220967 | 13.5 C | 45.6 % | 1008.8 mbar | -47 dBm | 6 % |
| 1732220607 | 13.5 C | 45.6 % | 1008.8 mbar | -46 dBm | 6 % |
| 1732220247 | 13.5 C | 45.6 % | 1008.8 mbar | -46 dBm | 6 % |
| 1732219887 | 13.5 C | 45.6 % | 1008.8 mbar | -47 dBm | 6 % |
| 1732219527 | 13.5 C | 46 % | 1008.8 mbar | -46 dBm | 6.4 % |
| 1732219167 | 13.5 C | 46 % | 1008.8 mbar | -48 dBm | 6.4 % |
| 1732218807 | 13.5 C | 46 % | 1009.2 mbar | -46 dBm | 6.4 % |
| 1732218447 | 13.5 C | 46 % | 1008.8 mbar | -46 dBm | 6.4 % |
| 1732218087 | 13.5 C | 46 % | 1008.8 mbar | -47 dBm | 6.4 % |
| 1732217727 | 13.5 C | 46 % | 1008.8 mbar | -47 dBm | 6 % |
| 1732217367 | 13.5 C | 46 % | 1008.8 mbar | -47 dBm | 6 % |
| 1732217007 | 13.5 C | 46 % | 1008.8 mbar | -46 dBm | 6 % |
| 1732216647 | 13.5 C | 46 % | 1008.8 mbar | -46 dBm | 6 % |
| 1732216287 | 13.5 C | 46.4 % | 1008.8 mbar | -47 dBm | 6 % |
*Used Equation Coefficients:
Temp: 0, 0.5, -25
Hmdt: 0, 0.4, 0
Baro: 0, 0.4, 950
RSSI: 0, -1, 0
Load: 0, 0.4, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)