This is the latest recevied telemetry packets stored in our database for station/object LZ1RZZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Outside Temperature* | Air Humidity* | Atmospheric pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732281302 | 10.6 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732281002 | 10.5 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732280707 | 10.4 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732280402 | 10.3 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732280102 | 10.2 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732279802 | 10.5 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732279507 | 10.5 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732279202 | 10.3 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732278903 | 10 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732278601 | 9.9 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732278302 | 9.8 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732278003 | 9.5 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732277702 | 9.8 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732277402 | 9.7 Deg.C | 100 Percent | 986 hPa | 0 | 0 |
| 1732277102 | 9.6 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732276801 | 9.4 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732276502 | 9.4 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732276202 | 9.4 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732275902 | 9.2 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732275601 | 9.2 Deg.C | 100 Percent | 986 hPa | 0 | 0 |
| 1732275302 | 8.8 Deg.C | 100 Percent | 986 hPa | 0 | 0 |
| 1732275003 | 9.1 Deg.C | 100 Percent | 986 hPa | 0 | 0 |
| 1732274702 | 8.9 Deg.C | 100 Percent | 986 hPa | 0 | 0 |
| 1732274402 | 7.6 Deg.C | 100 Percent | 985 hPa | 0 | 0 |
| 1732274103 | 8.6 Deg.C | 100 Percent | 986 hPa | 0 | 0 |
*Used Equation Coefficients:
Outside Temperature: 0, 0.1, 0
Air Humidity: 0, 1, 0
Atmospheric pressure: 0, 1, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)