APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

IR9AJ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR9AJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732276163	21 Pkt	7 Pkt	-30 dBm	0.08 V
1732275253	20 Pkt	5 Pkt	-30 dBm	0.08 V
1732274343	14 Pkt	5 Pkt	-30 dBm	0.08 V
1732273433	22 Pkt	1 Pkt	-30 dBm	0.08 V
1732272527	19 Pkt	2 Pkt	-30 dBm	0.08 V
1732271613	23 Pkt	2 Pkt	-31 dBm	0.08 V
1732270703	10 Pkt	2 Pkt	-30 dBm	0.08 V
1732270257	19 Pkt	3 Pkt	-30 dBm	0.08 V
1732269347	26 Pkt	3 Pkt	-30 dBm	0.08 V
1732268436	33 Pkt	2 Pkt	-30 dBm	0.08 V
1732267526	26 Pkt	3 Pkt	-31 dBm	0.08 V
1732266616	30 Pkt	3 Pkt	-30 dBm	0.08 V
1732265707	19 Pkt	7 Pkt	-32 dBm	0.08 V
1732264797	19 Pkt	1 Pkt	-28 dBm	0.08 V
1732263887	20 Pkt	3 Pkt	-30 dBm	0.08 V
1732262977	23 Pkt	2 Pkt	-32 dBm	0.08 V
1732262067	24 Pkt	1 Pkt	-30 dBm	0.08 V
1732261157	20 Pkt	3 Pkt	-31 dBm	0.08 V
1732260247	10 Pkt	3 Pkt	-30 dBm	0.08 V
1732259336	2 Pkt	3 Pkt	-30 dBm	0.1 V
1732258426	3 Pkt	2 Pkt	-30 dBm	0.1 V
1732257516	1 Pkt	2 Pkt	-30 dBm	0.08 V
1732256607	8 Pkt	4 Pkt	-30 dBm	0.1 V
1732255696	10 Pkt	4 Pkt	-30 dBm	0.08 V
1732254786	0 Pkt	5 Pkt	-31 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)