APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

OE3XDC-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3XDC-13. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1732253546	12.08 Volt	370 Pkt	69 Pcnt	2.5 C
1732253246	12.08 Volt	370 Pkt	70 Pcnt	2.5 C
1732252946	12.08 Volt	370 Pkt	71 Pcnt	2 C
1732252646	12.08 Volt	360 Pkt	69 Pcnt	2 C
1732252346	12.08 Volt	370 Pkt	68 Pcnt	2 C
1732252046	12.08 Volt	370 Pkt	69 Pcnt	2 C
1732251746	12.08 Volt	360 Pkt	69 Pcnt	2 C
1732251446	12.08 Volt	360 Pkt	69 Pcnt	2 C
1732251146	11.78 Volt	360 Pkt	69 Pcnt	2 C
1732250846	12.08 Volt	360 Pkt	68 Pcnt	1.5 C
1732250546	12.08 Volt	360 Pkt	68 Pcnt	2 C
1732250246	12.08 Volt	370 Pkt	69 Pcnt	2 C
1732249947	12.08 Volt	370 Pkt	70 Pcnt	2 C
1732249647	12 Volt	370 Pkt	69 Pcnt	2 C
1732249346	11.78 Volt	370 Pkt	69 Pcnt	2 C
1732249046	12 Volt	370 Pkt	70 Pcnt	2 C
1732248746	12.08 Volt	370 Pkt	69 Pcnt	2 C
1732248446	12.08 Volt	350 Pkt	67 Pcnt	2 C
1732248146	12.08 Volt	350 Pkt	66 Pcnt	2 C
1732247846	12.08 Volt	340 Pkt	65 Pcnt	2 C
1732247546	12.08 Volt	340 Pkt	65 Pcnt	2 C
1732247246	11.78 Volt	330 Pkt	64 Pcnt	2 C
1732246946	12.08 Volt	320 Pkt	63 Pcnt	2 C
1732246646	12.08 Volt	320 Pkt	63 Pcnt	2 C
1732246346	11.78 Volt	320 Pkt	64 Pcnt	2 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)