This is the latest recevied telemetry packets stored in our database for station/object SP8EBC-11. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10min* | Tx10min* | Digi10min* | Vbatt* | Tempre* |
|---|---|---|---|---|---|
| 1732266969 | 0 Pkt | 6 Pkt | 0 Pkt | 12.14 V | 2.5 DegC |
| 1732266369 | 0 Pkt | 8 Pkt | 0 Pkt | 11.94 V | 2 DegC |
| 1732265765 | 0 Pkt | 11 Pkt | 0 Pkt | 11.94 V | 1 DegC |
| 1732265126 | 0 Pkt | 8 Pkt | 0 Pkt | 11.92 V | 1 DegC |
| 1732264480 | 0 Pkt | 6 Pkt | 0 Pkt | 11.42 V | 2 DegC |
| 1732263881 | 0 Pkt | 6 Pkt | 0 Pkt | 11.7 V | 2.5 DegC |
| 1732263277 | 0 Pkt | 6 Pkt | 0 Pkt | 12.02 V | 2.5 DegC |
| 1732262678 | 0 Pkt | 6 Pkt | 0 Pkt | 12.32 V | 2.5 DegC |
| 1732262074 | 0 Pkt | 6 Pkt | 0 Pkt | 11.92 V | 2 DegC |
| 1732261475 | 0 Pkt | 6 Pkt | 0 Pkt | 11.4 V | 2 DegC |
| 1732260870 | 0 Pkt | 6 Pkt | 0 Pkt | 11.5 V | 1.5 DegC |
| 1732260270 | 0 Pkt | 13 Pkt | 0 Pkt | 11.72 V | 0.5 DegC |
| 1732251687 | 0 Pkt | 22 Pkt | 0 Pkt | 11.3 V | -0.5 DegC |
| 1732199191 | 0 Pkt | 5 Pkt | 0 Pkt | 11.54 V | 2.5 DegC |
| 1732198591 | 0 Pkt | 7 Pkt | 0 Pkt | 11.82 V | 2.5 DegC |
| 1732197991 | 0 Pkt | 8 Pkt | 0 Pkt | 12.02 V | 2.5 DegC |
| 1732196623 | 0 Pkt | 10 Pkt | 0 Pkt | 12.14 V | 3 DegC |
| 1732195419 | 0 Pkt | 6 Pkt | 0 Pkt | 12.2 V | 3 DegC |
| 1732194816 | 0 Pkt | 6 Pkt | 0 Pkt | 12.24 V | 3.5 DegC |
| 1732194216 | 0 Pkt | 11 Pkt | 0 Pkt | 12.36 V | 3.5 DegC |
| 1732193613 | 0 Pkt | 11 Pkt | 0 Pkt | 12.48 V | 3.5 DegC |
| 1732192397 | 0 Pkt | 6 Pkt | 0 Pkt | 12.32 V | 3.5 DegC |
| 1732191798 | 0 Pkt | 6 Pkt | 0 Pkt | 12.3 V | 3.5 DegC |
| 1732191194 | 0 Pkt | 6 Pkt | 0 Pkt | 12.32 V | 3.5 DegC |
| 1732190595 | 0 Pkt | 6 Pkt | 0 Pkt | 12.46 V | 4 DegC |
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Tx10min: 0, 1, 0
Digi10min: 0, 1, 0
Vbatt: 0, 0.02, 10
Tempre: 0, 0.5, -50
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)