APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

IS0AML-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IS0AML-12. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1732292658	3 Pkt	10 Pkt	0.63 Pcnt	78 Pcnt
1732292357	2 Pkt	10 Pkt	0.63 Pcnt	78 Pcnt
1732292057	2 Pkt	10 Pkt	0.63 Pcnt	78 Pcnt
1732291757	2 Pkt	10 Pkt	0.63 Pcnt	78 Pcnt
1732291456	2 Pkt	10 Pkt	0.63 Pcnt	78 Pcnt
1732291156	4 Pkt	10 Pkt	0.63 Pcnt	78 Pcnt
1732290856	4 Pkt	10 Pkt	0.63 Pcnt	78 Pcnt
1732290556	2 Pkt	10 Pkt	0.63 Pcnt	78 Pcnt
1732290255	2 Pkt	10 Pkt	0.63 Pcnt	78 Pcnt
1732289955	2 Pkt	20 Pkt	0.63 Pcnt	78 Pcnt
1732289655	2 Pkt	30 Pkt	0.63 Pcnt	78 Pcnt
1732289354	3 Pkt	30 Pkt	0.63 Pcnt	78 Pcnt
1732289054	2 Pkt	30 Pkt	0.63 Pcnt	78 Pcnt
1732288754	1 Pkt	40 Pkt	0.63 Pcnt	78 Pcnt
1732288454	2 Pkt	50 Pkt	0.63 Pcnt	78 Pcnt
1732288153	2 Pkt	50 Pkt	0.63 Pcnt	78 Pcnt
1732287853	2 Pkt	60 Pkt	0.63 Pcnt	78 Pcnt
1732287553	6 Pkt	60 Pkt	0.63 Pcnt	78 Pcnt
1732287252	7 Pkt	60 Pkt	0.63 Pcnt	78 Pcnt
1732286952	6 Pkt	60 Pkt	0.63 Pcnt	78 Pcnt
1732286652	15 Pkt	80 Pkt	0.63 Pcnt	78 Pcnt
1732286351	13 Pkt	70 Pkt	0.63 Pcnt	78 Pcnt
1732286051	3 Pkt	60 Pkt	0.63 Pcnt	78 Pcnt
1732285751	11 Pkt	60 Pkt	0.63 Pcnt	78 Pcnt
1732285450	19 Pkt	60 Pkt	0.63 Pcnt	78 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)