APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

IQ2DK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ2DK. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1732260542	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732260241	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732259941	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732259641	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732259342	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732259041	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732258741	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732258441	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732258142	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732257842	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732257542	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732257242	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732256942	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732256642	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732256342	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732256042	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732255742	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732255442	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732255142	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732254842	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732254542	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732254242	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732253942	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732253642	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt
1732253342	0 Pkt	0 Pkt	0 Pkt	0 Pcnt	0 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)