This is the latest recevied telemetry packets stored in our database for station/object DO7DH-5. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Brightness* | RSSI* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732246240 | 12.5 V | 0 % | -70 dBm | 0 | 0 |
| 1732245924 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732245657 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732245309 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732245004 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732244710 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732244451 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732244141 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732243848 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732243557 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732243248 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732242906 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732242640 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732242357 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732242004 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732241726 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732241412 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732241143 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732240802 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732240536 | 12.5 V | 0 % | -71 dBm | 0 | 0 |
| 1732240220 | 12.6 V | 0 % | -71 dBm | 0 | 0 |
| 1732239902 | 12.6 V | 0 % | -71 dBm | 0 | 0 |
| 1732239648 | 12.6 V | 0 % | -71 dBm | 0 | 0 |
| 1732239343 | 12.6 V | 0 % | -71 dBm | 0 | 0 |
| 1732239006 | 12.6 V | 0 % | -71 dBm | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.1, 0
Brightness: 0, 1, 0
RSSI: 0, -1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)