APRS.ro MAP

Reset

reset

IZ1XBB-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ1XBB-2. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732312404	13.8 Volt	490 Pkt	140 Pkt	60 Pcnt
1732311803	13.8 Volt	490 Pkt	140 Pkt	60 Pcnt
1732311207	13.8 Volt	480 Pkt	140 Pkt	60 Pcnt
1732310603	13.2 Volt	470 Pkt	140 Pkt	61 Pcnt
1732310002	13.8 Volt	470 Pkt	130 Pkt	61 Pcnt
1732309401	13.8 Volt	470 Pkt	130 Pkt	64 Pcnt
1732308802	13.8 Volt	500 Pkt	140 Pkt	67 Pcnt
1732308202	13.8 Volt	530 Pkt	150 Pkt	71 Pcnt
1732307599	13.8 Volt	520 Pkt	150 Pkt	70 Pcnt
1732306999	13.8 Volt	530 Pkt	150 Pkt	72 Pcnt
1732306398	13.8 Volt	540 Pkt	150 Pkt	74 Pcnt
1732305809	13.8 Volt	510 Pkt	150 Pkt	73 Pcnt
1732305197	13.73 Volt	480 Pkt	150 Pkt	71 Pcnt
1732304600	13.8 Volt	440 Pkt	140 Pkt	68 Pcnt
1732303996	13.8 Volt	430 Pkt	130 Pkt	69 Pcnt
1732303409	13.8 Volt	420 Pkt	140 Pkt	69 Pcnt
1732302795	13.8 Volt	410 Pkt	140 Pkt	69 Pcnt
1732302195	13.8 Volt	430 Pkt	140 Pkt	70 Pcnt
1732301594	13.8 Volt	440 Pkt	140 Pkt	71 Pcnt
1732300996	13.35 Volt	430 Pkt	140 Pkt	72 Pcnt
1732300392	13.28 Volt	450 Pkt	130 Pkt	73 Pcnt
1732299792	13.28 Volt	460 Pkt	120 Pkt	72 Pcnt
1732299192	13.58 Volt	460 Pkt	130 Pkt	74 Pcnt
1732298590	13.58 Volt	440 Pkt	120 Pkt	75 Pcnt
1732298012	13.65 Volt	440 Pkt	130 Pkt	76 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)