APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

LD7TG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LD7TG. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732278314	13.88 Volt	540 Pkt	180 Pkt	67 Pcnt
1732274714	13.73 Volt	540 Pkt	180 Pkt	70 Pcnt
1732271114	13.88 Volt	410 Pkt	140 Pkt	64 Pcnt
1732267514	13.88 Volt	330 Pkt	100 Pkt	62 Pcnt
1732263914	13.8 Volt	310 Pkt	80 Pkt	60 Pcnt
1732260314	13.88 Volt	290 Pkt	80 Pkt	58 Pcnt
1732256715	13.88 Volt	300 Pkt	80 Pkt	61 Pcnt
1732253115	13.8 Volt	300 Pkt	80 Pkt	58 Pcnt
1732249515	13.8 Volt	270 Pkt	80 Pkt	60 Pcnt
1732245915	13.8 Volt	260 Pkt	80 Pkt	54 Pcnt
1732242315	13.8 Volt	270 Pkt	80 Pkt	62 Pcnt
1732238715	13.8 Volt	260 Pkt	80 Pkt	59 Pcnt
1732235115	13.73 Volt	280 Pkt	80 Pkt	62 Pcnt
1732231516	13.8 Volt	290 Pkt	80 Pkt	60 Pcnt
1732227916	13.73 Volt	300 Pkt	80 Pkt	63 Pcnt
1732224316	13.73 Volt	290 Pkt	80 Pkt	60 Pcnt
1732220716	13.73 Volt	280 Pkt	90 Pkt	61 Pcnt
1732217116	13.88 Volt	270 Pkt	80 Pkt	59 Pcnt
1732213516	13.8 Volt	270 Pkt	80 Pkt	62 Pcnt
1732209916	13.8 Volt	270 Pkt	80 Pkt	59 Pcnt
1732206317	13.8 Volt	280 Pkt	80 Pkt	62 Pcnt
1732202717	13.8 Volt	270 Pkt	80 Pkt	63 Pcnt
1732199117	13.8 Volt	310 Pkt	80 Pkt	64 Pcnt
1732195517	13.88 Volt	510 Pkt	160 Pkt	69 Pcnt
1732191917	13.8 Volt	450 Pkt	130 Pkt	66 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)