APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

IR1ZXE-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1ZXE-11. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732268657	14.01 Volt	10 Pkt	0 Pkt	14 Pcnt
1732266855	14.01 Volt	10 Pkt	0 Pkt	20 Pcnt
1732265053	14.01 Volt	20 Pkt	0 Pkt	23 Pcnt
1732263252	14.01 Volt	20 Pkt	0 Pkt	15 Pcnt
1732261450	14.01 Volt	20 Pkt	0 Pkt	14 Pcnt
1732259648	14.01 Volt	10 Pkt	0 Pkt	11 Pcnt
1732257846	14.01 Volt	10 Pkt	0 Pkt	12 Pcnt
1732256045	14.01 Volt	30 Pkt	0 Pkt	20 Pcnt
1732254243	14.01 Volt	40 Pkt	0 Pkt	27 Pcnt
1732252441	14.01 Volt	60 Pkt	0 Pkt	42 Pcnt
1732250639	14.01 Volt	90 Pkt	0 Pkt	72 Pcnt
1732248838	14.01 Volt	110 Pkt	10 Pkt	77 Pcnt
1732247036	14.01 Volt	120 Pkt	10 Pkt	79 Pcnt
1732245234	14.01 Volt	120 Pkt	10 Pkt	81 Pcnt
1732243433	14.01 Volt	130 Pkt	30 Pkt	85 Pcnt
1732241631	14.01 Volt	110 Pkt	20 Pkt	84 Pcnt
1732239829	14.01 Volt	90 Pkt	10 Pkt	83 Pcnt
1732238027	14.01 Volt	100 Pkt	10 Pkt	87 Pcnt
1732236226	14.01 Volt	80 Pkt	10 Pkt	86 Pcnt
1732234424	14.01 Volt	80 Pkt	0 Pkt	84 Pcnt
1732232622	14.01 Volt	100 Pkt	0 Pkt	87 Pcnt
1732230820	14.01 Volt	80 Pkt	0 Pkt	87 Pcnt
1732229019	14.01 Volt	90 Pkt	0 Pkt	79 Pcnt
1732227217	14.01 Volt	90 Pkt	10 Pkt	77 Pcnt
1732225415	14.01 Volt	100 Pkt	0 Pkt	79 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.077, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)