APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

DB0KT-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0KT-2. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1732243833	0.18 Rx Erlang	0 Tx Erlang	159 count/10m	26 count/10m	0 count/10m
1732241427	0.17 Rx Erlang	0 Tx Erlang	156 count/10m	14 count/10m	0 count/10m
1732240227	0.17 Rx Erlang	0 Tx Erlang	150 count/10m	15 count/10m	0 count/10m
1732239027	0.14 Rx Erlang	0 Tx Erlang	136 count/10m	9 count/10m	0 count/10m
1732237827	0.17 Rx Erlang	0 Tx Erlang	152 count/10m	11 count/10m	0 count/10m
1732236629	0.18 Rx Erlang	0 Tx Erlang	164 count/10m	12 count/10m	0 count/10m
1732235427	0.15 Rx Erlang	0 Tx Erlang	143 count/10m	10 count/10m	0 count/10m
1732234274	0.17 Rx Erlang	0 Tx Erlang	158 count/10m	9 count/10m	0 count/10m
1732233027	0.18 Rx Erlang	0 Tx Erlang	150 count/10m	8 count/10m	0 count/10m
1732231827	0.18 Rx Erlang	0 Tx Erlang	154 count/10m	10 count/10m	0 count/10m
1732230627	0.17 Rx Erlang	0 Tx Erlang	155 count/10m	15 count/10m	0 count/10m
1732229431	0.18 Rx Erlang	0 Tx Erlang	163 count/10m	15 count/10m	0 count/10m
1732228227	0.16 Rx Erlang	0 Tx Erlang	151 count/10m	16 count/10m	0 count/10m
1732227030	0.18 Rx Erlang	0 Tx Erlang	160 count/10m	16 count/10m	0 count/10m
1732225827	0.17 Rx Erlang	0 Tx Erlang	164 count/10m	12 count/10m	0 count/10m
1732224627	0.16 Rx Erlang	0 Tx Erlang	148 count/10m	11 count/10m	0 count/10m
1732223427	0.18 Rx Erlang	0 Tx Erlang	157 count/10m	13 count/10m	0 count/10m
1732222227	0.17 Rx Erlang	0 Tx Erlang	160 count/10m	12 count/10m	0 count/10m
1732221027	0.17 Rx Erlang	0 Tx Erlang	159 count/10m	18 count/10m	0 count/10m
1732219828	0.16 Rx Erlang	0 Tx Erlang	168 count/10m	15 count/10m	0 count/10m
1732218627	0.16 Rx Erlang	0 Tx Erlang	152 count/10m	16 count/10m	0 count/10m
1732217427	0.15 Rx Erlang	0 Tx Erlang	145 count/10m	17 count/10m	0 count/10m
1732216227	0.15 Rx Erlang	0 Tx Erlang	148 count/10m	11 count/10m	0 count/10m
1732215027	0.16 Rx Erlang	0 Tx Erlang	152 count/10m	10 count/10m	0 count/10m
1732213827	0.16 Rx Erlang	0 Tx Erlang	159 count/10m	13 count/10m	0 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)