This is the latest recevied telemetry packets stored in our database for station/object UB0JBX-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | LoadAvg5m* | MemUsed* | Temp* | AudioLvl* | Value5* |
|---|---|---|---|---|---|
| 1732246500 | 0.9 | 9 % | 42 C | 97 | 0 |
| 1732245600 | 0.8 | 9 % | 42 C | 96 | 0 |
| 1732244699 | 0.8 | 9 % | 42 C | 96 | 0 |
| 1732243800 | 0.8 | 9 % | 42 C | 96 | 0 |
| 1732242900 | 0.8 | 9 % | 44 C | 97 | 0 |
| 1732242000 | 0.8 | 9 % | 47 C | 96 | 0 |
| 1732241100 | 0.9 | 9 % | 49 C | 96 | 0 |
| 1732240200 | 0.9 | 9 % | 50 C | 97 | 0 |
| 1732239300 | 0.9 | 9 % | 49 C | 97 | 0 |
| 1732238400 | 0.9 | 9 % | 50 C | 96 | 0 |
| 1732237500 | 0.9 | 9 % | 49 C | 96 | 0 |
| 1732236600 | 0.8 | 9 % | 49 C | 97 | 0 |
| 1732235700 | 0.8 | 9 % | 49 C | 95 | 0 |
| 1732234800 | 0.8 | 9 % | 50 C | 97 | 0 |
| 1732233900 | 0.8 | 10 % | 49 C | 97 | 0 |
| 1732233000 | 0.9 | 10 % | 49 C | 97 | 0 |
| 1732232101 | 0.9 | 10 % | 49 C | 96 | 0 |
| 1732231200 | 0.9 | 10 % | 50 C | 95 | 0 |
| 1732230300 | 0.9 | 10 % | 50 C | 95 | 0 |
| 1732229400 | 0.8 | 10 % | 50 C | 96 | 0 |
| 1732228500 | 1.3 | 10 % | 50 C | 97 | 0 |
| 1732227598 | 0.8 | 10 % | 49 C | 97 | 0 |
| 1732226698 | 0.8 | 10 % | 49 C | 97 | 0 |
| 1732225798 | 0.9 | 10 % | 50 C | 97 | 0 |
| 1732224899 | 0.9 | 10 % | 50 C | 97 | 0 |
*Used Equation Coefficients:
LoadAvg5m: 0, 0.1, 0
MemUsed: 0, 1, 0
Temp: 0, 1, 0
AudioLvl: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)