This is the latest recevied telemetry packets stored in our database for station/object A68AN-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CabinetTemp* | CabinetHum* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732311988 | 31.4 C | 53 %RH | 0 | 0 | 0 |
| 1732311647 | 31.4 C | 53 %RH | 0 | 0 | 0 |
| 1732310130 | 31.5 C | 53 %RH | 0 | 0 | 0 |
| 1732308588 | 31.6 C | 54 %RH | 0 | 0 | 0 |
| 1732308270 | 31.6 C | 54 %RH | 0 | 0 | 0 |
| 1732306408 | 31.6 C | 54 %RH | 0 | 0 | 0 |
| 1732305527 | 31.5 C | 54 %RH | 0 | 0 | 0 |
| 1732304548 | 31.7 C | 54 %RH | 0 | 0 | 0 |
| 1732302689 | 31.6 C | 53 %RH | 0 | 0 | 0 |
| 1732302467 | 31.5 C | 53 %RH | 0 | 0 | 0 |
| 1732300828 | 31.8 C | 52 %RH | 0 | 0 | 0 |
| 1732299407 | 31.9 C | 52 %RH | 0 | 0 | 0 |
| 1732298968 | 32 C | 52 %RH | 0 | 0 | 0 |
| 1732297110 | 32.1 C | 52 %RH | 0 | 0 | 0 |
| 1732296347 | 32.2 C | 52 %RH | 0 | 0 | 0 |
| 1732295249 | 32.3 C | 52 %RH | 0 | 0 | 0 |
| 1732293389 | 32.4 C | 51 %RH | 0 | 0 | 0 |
| 1732293287 | 32.5 C | 51 %RH | 0 | 0 | 0 |
| 1732291529 | 32.6 C | 51 %RH | 0 | 0 | 0 |
| 1732290227 | 32.8 C | 50 %RH | 0 | 0 | 0 |
| 1732289669 | 32.9 C | 50 %RH | 0 | 0 | 0 |
| 1732287810 | 33.1 C | 49 %RH | 0 | 0 | 0 |
| 1732287168 | 33.2 C | 48 %RH | 0 | 0 | 0 |
| 1732285952 | 33.5 C | 47 %RH | 0 | 0 | 0 |
| 1732284108 | 34.2 C | 45 %RH | 0 | 0 | 0 |
*Used Equation Coefficients:
CabinetTemp: 0, 0.1, 0
CabinetHum: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)