This is the latest recevied telemetry packets stored in our database for station/object DB0ROD. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RX'ed* | DIGI'ed* | Decode* | DecodT* | Value5* |
|---|---|---|---|---|---|
| 1732311266 | 68 Packets | 8 Packets | 64 % | 68 % | 0 |
| 1732307662 | 55 Packets | 7 Packets | 70 % | 68 % | 0 |
| 1732304059 | 64 Packets | 7 Packets | 74 % | 68 % | 0 |
| 1732300455 | 66 Packets | 7 Packets | 79 % | 68 % | 0 |
| 1732296852 | 58 Packets | 2 Packets | 82 % | 68 % | 0 |
| 1732293249 | 57 Packets | 3 Packets | 84 % | 68 % | 0 |
| 1732289645 | 60 Packets | 7 Packets | 76 % | 68 % | 0 |
| 1732286042 | 66 Packets | 6 Packets | 78 % | 68 % | 0 |
*Used Equation Coefficients:
RX'ed: 0, 1, 0
DIGI'ed: 0, 1, 0
Decode: 0, 1, 0
DecodT: 0, 1, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)