This is the latest recevied telemetry packets stored in our database for station/object YO5ER-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732146664 | 121.1 | 95.9 | 0 | 0 | 0 |
| 1732146064 | 121.1 | 95.4 | 0 | 0 | 0 |
| 1732145463 | 121.2 | 95.6 | 0 | 0 | 0 |
| 1732144864 | 121.2 | 95.7 | 0 | 0 | 0 |
| 1732144264 | 121.2 | 95.8 | 0 | 0 | 0 |
| 1732143664 | 121.2 | 96.4 | 0 | 0 | 0 |
| 1732143064 | 121.4 | 96.1 | 0 | 0 | 0 |
| 1732142463 | 121.5 | 95.6 | 0 | 0 | 0 |
| 1732141864 | 121.6 | 95.5 | 0 | 0 | 0 |
| 1732141263 | 121.6 | 95.7 | 0 | 0 | 0 |
| 1732140664 | 121.7 | 96.1 | 0 | 0 | 0 |
| 1732140064 | 121.8 | 96.2 | 0 | 0 | 0 |
| 1732139464 | 121.7 | 96.5 | 0 | 0 | 0 |
| 1732138864 | 121.7 | 97.1 | 0 | 0 | 0 |
| 1732138263 | 121.8 | 97.1 | 0 | 0 | 0 |
| 1732137664 | 121.7 | 97.7 | 0 | 0 | 0 |
| 1732137064 | 121.6 | 97.9 | 0 | 0 | 0 |
| 1732136464 | 121.6 | 98 | 0 | 0 | 0 |
| 1732135864 | 121.7 | 98.3 | 0 | 0 | 0 |
| 1732135263 | 121.7 | 98.6 | 0 | 0 | 0 |
| 1732134664 | 121.8 | 98.9 | 0 | 0 | 0 |
| 1732134063 | 121.8 | 98.8 | 0 | 0 | 0 |
| 1732133464 | 121.8 | 98.4 | 0 | 0 | 0 |
| 1732132864 | 121.9 | 98.8 | 0 | 0 | 0 |
| 1732132263 | 122 | 98.6 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)