APRS.ro MAP

Reset

reset

F4SGU-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F4SGU-3. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1738334994	14.1 Volt	100 Pkt	60 Pkt	79 Pcnt
1738333192	14.1 Volt	120 Pkt	70 Pkt	80 Pcnt
1738331390	14.1 Volt	100 Pkt	60 Pkt	79 Pcnt
1738329589	14.03 Volt	100 Pkt	50 Pkt	78 Pcnt
1738327787	14.03 Volt	100 Pkt	50 Pkt	80 Pcnt
1738325986	14.1 Volt	90 Pkt	50 Pkt	80 Pcnt
1738324183	14.03 Volt	90 Pkt	50 Pkt	79 Pcnt
1738322382	14.1 Volt	80 Pkt	40 Pkt	76 Pcnt
1738320580	14.03 Volt	70 Pkt	30 Pkt	69 Pcnt
1738318778	14.03 Volt	90 Pkt	50 Pkt	74 Pcnt
1738316977	13.95 Volt	120 Pkt	60 Pkt	77 Pcnt
1738315175	14.1 Volt	140 Pkt	70 Pkt	76 Pcnt
1738313373	14.1 Volt	140 Pkt	60 Pkt	73 Pcnt
1738311571	14.1 Volt	100 Pkt	40 Pkt	71 Pcnt
1738309769	14.03 Volt	110 Pkt	40 Pkt	76 Pcnt
1738307968	14.03 Volt	120 Pkt	40 Pkt	74 Pcnt
1738306166	14.1 Volt	110 Pkt	40 Pkt	73 Pcnt
1738304364	14.1 Volt	110 Pkt	40 Pkt	77 Pcnt
1738302565	14.1 Volt	110 Pkt	30 Pkt	71 Pcnt
1738300761	14.1 Volt	80 Pkt	20 Pkt	68 Pcnt
1738298959	14.1 Volt	70 Pkt	20 Pkt	74 Pcnt
1738297157	14.1 Volt	100 Pkt	30 Pkt	73 Pcnt
1738295356	14.1 Volt	90 Pkt	30 Pkt	71 Pcnt
1738293554	14.1 Volt	80 Pkt	20 Pkt	77 Pcnt
1738291752	14.1 Volt	90 Pkt	30 Pkt	78 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)