This is the latest recevied telemetry packets stored in our database for station/object SM0PQB-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Temp* | Temp2* | Rx10m* | Eff1h* |
|---|---|---|---|---|---|
| 1732285335 | 11.7 Volt | 18.5 C | 0 C | 0 Pkt | 60 % |
| 1732285035 | 11.7 Volt | 18.5 C | 0 C | 0 Pkt | 64 % |
| 1732284735 | 11.7 Volt | 18.5 C | 0 C | 0 Pkt | 60 % |
| 1732284435 | 11.7 Volt | 18.5 C | 0 C | 0 Pkt | 58 % |
| 1732284135 | 11.78 Volt | 18.5 C | 0 C | 0 Pkt | 58 % |
| 1732283835 | 11.78 Volt | 18.5 C | 0 C | 0 Pkt | 58 % |
| 1732283535 | 11.7 Volt | 18.5 C | 0 C | 0 Pkt | 58 % |
| 1732283235 | 11.7 Volt | 18.5 C | 0 C | 6 Pkt | 58 % |
| 1732282935 | 11.7 Volt | 18.5 C | 0 C | 9 Pkt | 58 % |
| 1732282635 | 11.7 Volt | 18.5 C | 0 C | 0 Pkt | 14 % |
| 1732282335 | 11.7 Volt | 18.5 C | 0 C | 0 Pkt | 20 % |
| 1732282035 | 11.7 Volt | 18.5 C | 0 C | 0 Pkt | 20 % |
| 1732281735 | 11.7 Volt | 18.5 C | 0 C | 0 Pkt | 20 % |
| 1732281435 | 11.78 Volt | 18.5 C | 0 C | 1 Pkt | 20 % |
| 1732281135 | 11.78 Volt | 18.5 C | 0 C | 1 Pkt | 25 % |
| 1732280835 | 11.78 Volt | 18.5 C | 0 C | 0 Pkt | 0 % |
| 1732280535 | 11.7 Volt | 18.5 C | 0 C | 0 Pkt | 0 % |
| 1732280235 | 11.78 Volt | 18.5 C | 0 C | 0 Pkt | 0 % |
| 1732279935 | 11.78 Volt | 18.5 C | 0 C | 0 Pkt | 0 % |
| 1732279635 | 11.78 Volt | 18.5 C | 0 C | 0 Pkt | 0 % |
| 1732279335 | 11.78 Volt | 18.5 C | 0 C | 0 Pkt | 0 % |
| 1732279035 | 11.78 Volt | 18.5 C | 0 C | 0 Pkt | 0 % |
| 1732278735 | 11.78 Volt | 18.5 C | 0 C | 0 Pkt | 50 % |
| 1732278435 | 11.78 Volt | 18.5 C | 0 C | 0 Pkt | 50 % |
| 1732278135 | 11.78 Volt | 18.5 C | 0 C | 0 Pkt | 50 % |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Temp: 0, 0.5, -64
Temp2: 0, 0.5, -64
Rx10m: 0, 1, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)