This is the latest recevied telemetry packets stored in our database for station/object DH0BRO-1. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
|---|---|---|---|---|---|
| 1737240669 | 21.2 | 0.1 | 77 | 7 | 0 |
| 1737239469 | 11 | 0.2 | 32 | 1 | 0 |
| 1737237025 | 18.6 | 0.1 | 69 | 3 | 0 |
| 1737235825 | 11.9 | 0.2 | 32 | 2 | 0 |
| 1737233425 | 19.2 | 0.1 | 83 | 0 | 0 |
| 1737232225 | 9.2 | 0.2 | 26 | 1 | 0 |
| 1737229825 | 17.8 | 0.1 | 80 | 2 | 0 |
| 1737228625 | 15.6 | 0.2 | 41 | 1 | 0 |
| 1737226272 | 21.3 | 0.1 | 70 | 1 | 0 |
| 1737225072 | 8.4 | 0.2 | 20 | 2 | 0 |
| 1737222641 | 8.6 | 0.1 | 38 | 4 | 0 |
| 1737221441 | 5.7 | 0.2 | 16 | 0 | 0 |
| 1737219073 | 11.7 | 0.1 | 50 | 2 | 0 |
| 1737217872 | 11.9 | 0.2 | 31 | 0 | 0 |
| 1737215425 | 20.2 | 0.1 | 83 | 3 | 0 |
| 1737214225 | 19.6 | 0.2 | 54 | 1 | 0 |
| 1737211823 | 8.9 | 0.1 | 37 | 1 | 0 |
| 1737210623 | 7 | 0.2 | 19 | 0 | 0 |
| 1737208238 | 8.9 | 0.1 | 43 | 2 | 0 |
| 1737207038 | 7.5 | 0.2 | 25 | 0 | 0 |
| 1737204674 | 17.7 | 0.1 | 71 | 9 | 0 |
| 1737203474 | 16.8 | 0.2 | 41 | 4 | 0 |
| 1737201024 | 7.4 | 0.1 | 35 | 1 | 0 |
| 1737199824 | 7.1 | 0.2 | 24 | 1 | 0 |
| 1737197425 | 14.6 | 0.1 | 53 | 4 | 0 |
*Used Equation Coefficients:
Avg 10m: 0, 1, 0
Avg 10m: 0, 1, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)