APRS.ro MAP

Reset

reset

SK3JR-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SK3JR-4. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Bat*	Wind*	Temp*
1737267062	13.8 Volt	13.5 Volt	1.8 m/s	2.5 C
1737265862	13.8 Volt	13.5 Volt	1.8 m/s	2.5 C
1737264662	13.8 Volt	13.5 Volt	1.8 m/s	2.5 C
1737263462	13.8 Volt	13.5 Volt	1.8 m/s	1.5 C
1737262262	13.8 Volt	13.5 Volt	1.8 m/s	2.5 C
1737261062	13.8 Volt	13.5 Volt	1.8 m/s	0.5 C
1737259862	13.8 Volt	13.5 Volt	1.5 m/s	0.5 C
1737258662	13.8 Volt	13.5 Volt	1.2 m/s	0.5 C
1737257462	13.8 Volt	13.5 Volt	1.5 m/s	0.5 C
1737256262	13.8 Volt	13.5 Volt	1.2 m/s	1 C
1737255062	13.8 Volt	13.5 Volt	1.2 m/s	1 C
1737253862	13.8 Volt	13.5 Volt	1.5 m/s	1 C
1737252662	13.8 Volt	13.5 Volt	1.2 m/s	1 C
1737251462	13.8 Volt	13.5 Volt	1.5 m/s	1.5 C
1737250263	13.8 Volt	13.5 Volt	1.5 m/s	1.5 C
1737249063	13.8 Volt	13.5 Volt	1.5 m/s	1.5 C
1737247863	13.8 Volt	13.5 Volt	1.8 m/s	2 C
1737246663	13.8 Volt	13.5 Volt	1.5 m/s	1.5 C
1737245463	13.8 Volt	13.5 Volt	1.2 m/s	1 C
1737244263	13.8 Volt	13.5 Volt	1.5 m/s	1 C
1737243063	13.8 Volt	13.5 Volt	1.2 m/s	0.5 C
1737241863	13.8 Volt	13.5 Volt	1.2 m/s	1 C
1737240663	13.8 Volt	13.5 Volt	0.9 m/s	0.5 C
1737239463	13.8 Volt	13.5 Volt	0.9 m/s	1 C
1737238263	13.8 Volt	13.5 Volt	1.2 m/s	0 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Bat: 0, 0.1, 0

Wind: 0, 0.3, 0

Chg: 0, 0.1953, -24.8031

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)