This is the latest recevied telemetry packets stored in our database for station/object DF7RW-1. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732242427 | 4.24 VDC | 12.48 VDC | 0 | 0 | 0 |
| 1732238827 | 4.19 VDC | 12.48 VDC | 0 | 0 | 0 |
| 1732235227 | 4.23 VDC | 12.48 VDC | 0 | 0 | 0 |
| 1732231627 | 4.22 VDC | 12.5 VDC | 0 | 0 | 0 |
| 1732228027 | 4.24 VDC | 12.5 VDC | 0 | 0 | 0 |
| 1732224427 | 4.28 VDC | 12.5 VDC | 0 | 0 | 0 |
| 1732220827 | 4.2 VDC | 12.52 VDC | 0 | 0 | 0 |
| 1732217227 | 4.29 VDC | 12.54 VDC | 0 | 0 | 0 |
| 1732213626 | 4.25 VDC | 12.54 VDC | 0 | 0 | 0 |
| 1732210026 | 4.22 VDC | 12.58 VDC | 0 | 0 | 0 |
| 1732206426 | 4.24 VDC | 12.6 VDC | 0 | 0 | 0 |
| 1732202826 | 4.28 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1732199226 | 4.27 VDC | 12.8 VDC | 0 | 0 | 0 |
| 1732195626 | 4.23 VDC | 13.04 VDC | 0 | 0 | 0 |
| 1732192026 | 4.28 VDC | 13.12 VDC | 0 | 0 | 0 |
| 1732188426 | 4.23 VDC | 13.2 VDC | 0 | 0 | 0 |
| 1732184826 | 4.27 VDC | 13.14 VDC | 0 | 0 | 0 |
| 1732181226 | 4.26 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1732177626 | 4.19 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1732174026 | 4.26 VDC | 12.56 VDC | 0 | 0 | 0 |
| 1732170426 | 4.18 VDC | 12.54 VDC | 0 | 0 | 0 |
| 1732166826 | 4.18 VDC | 12.56 VDC | 0 | 0 | 0 |
| 1732163226 | 4.29 VDC | 12.58 VDC | 0 | 0 | 0 |
| 1732159625 | 4.19 VDC | 12.6 VDC | 0 | 0 | 0 |
| 1732156025 | 4.26 VDC | 12.62 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)