This is the latest recevied telemetry packets stored in our database for station/object F1ZOC-3. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | U Alim* | I Alim* | Temp* | RX'ed* | Decod* |
|---|---|---|---|---|---|
| 1732250241 | 0 | 0 | 15.5 | 0 | 100 |
| 1732249941 | 0 | 0 | 15.5 | 0 | 100 |
| 1732249641 | 0 | 0 | 15.5 | 0 | 100 |
| 1732249340 | 0 | 0 | 15.5 | 0 | 100 |
| 1732249040 | 0 | 0 | 15.5 | 0 | 100 |
| 1732248740 | 0 | 0 | 15.5 | 0 | 100 |
| 1732248440 | 0 | 0 | 15.5 | 0 | 100 |
| 1732248139 | 0 | 0 | 15.5 | 0 | 100 |
| 1732247839 | 0 | 0 | 15.5 | 0 | 100 |
| 1732247539 | 0 | 0 | 15.5 | 0 | 100 |
| 1732247239 | 0 | 0 | 15.5 | 0 | 100 |
| 1732246938 | 0 | 0 | 15.5 | 0 | 100 |
| 1732246638 | 0 | 0 | 15.5 | 0 | 100 |
| 1732246338 | 0 | 0 | 15.5 | 0 | 100 |
| 1732246038 | 0 | 0 | 15.5 | 0 | 100 |
| 1732245737 | 0 | 0 | 15.5 | 0 | 100 |
| 1732245437 | 0 | 0 | 15.5 | 0 | 100 |
| 1732245137 | 0 | 0 | 15.5 | 0 | 100 |
| 1732244837 | 0 | 0 | 15.5 | 0 | 100 |
| 1732244536 | 0 | 0 | 15.5 | 0 | 100 |
| 1732244236 | 0 | 0 | 15.5 | 0 | 100 |
| 1732243936 | 0 | 0 | 15.5 | 0 | 100 |
| 1732243636 | 0 | 0 | 15.5 | 0 | 100 |
| 1732243335 | 0 | 0 | 15.5 | 0 | 100 |
| 1732243035 | 0 | 0 | 15.5 | 0 | 100 |
*Used Equation Coefficients:
U Alim: 0, 0.1, 0
I Alim: 0, 19.5, 0
Temp: 0, 0.5, -64
RX'ed: 0, 1, 0
Decod: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)