This is the latest recevied telemetry packets stored in our database for station/object IU5HKU. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU Temp* | CPU Load* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732302905 | 35.7 Deg.C | 17 % | 0 | 0 | 0 |
| 1732302606 | 35.5 Deg.C | 49 % | 0 | 0 | 0 |
| 1732302306 | 34.1 Deg.C | 14 % | 0 | 0 | 0 |
| 1732302005 | 36.3 Deg.C | 38 % | 0 | 0 | 0 |
| 1732301706 | 33.9 Deg.C | 15 % | 0 | 0 | 0 |
| 1732301406 | 34.6 Deg.C | 41 % | 0 | 0 | 0 |
| 1732301105 | 35.5 Deg.C | 13 % | 0 | 0 | 0 |
| 1732300806 | 34.7 Deg.C | 37 % | 0 | 0 | 0 |
| 1732300506 | 36.1 Deg.C | 14 % | 0 | 0 | 0 |
| 1732300206 | 35 Deg.C | 42 % | 0 | 0 | 0 |
| 1732299906 | 34.9 Deg.C | 14 % | 0 | 0 | 0 |
| 1732299605 | 35.6 Deg.C | 39 % | 0 | 0 | 0 |
| 1732299306 | 35 Deg.C | 14 % | 0 | 0 | 0 |
| 1732299006 | 36 Deg.C | 39 % | 0 | 0 | 0 |
| 1732298706 | 34.4 Deg.C | 13 % | 0 | 0 | 0 |
| 1732298406 | 34.4 Deg.C | 40 % | 0 | 0 | 0 |
| 1732298106 | 34.1 Deg.C | 14 % | 0 | 0 | 0 |
| 1732297806 | 35.5 Deg.C | 55 % | 0 | 0 | 0 |
| 1732297506 | 34.7 Deg.C | 14 % | 0 | 0 | 0 |
| 1732297207 | 37.3 Deg.C | 37 % | 0 | 0 | 0 |
| 1732296906 | 34.7 Deg.C | 13 % | 0 | 0 | 0 |
| 1732296606 | 35.4 Deg.C | 46 % | 0 | 0 | 0 |
| 1732296306 | 36.3 Deg.C | 14 % | 0 | 0 | 0 |
| 1732296006 | 35.2 Deg.C | 49 % | 0 | 0 | 0 |
| 1732295705 | 36.2 Deg.C | 15 % | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU Temp: 0, 0.1, 0
CPU Load: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)