This is the latest recevied telemetry packets stored in our database for station/object SP3PDK-1. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732271294 | -29 dbm | 0.02 V | 0 | 0 | 0 |
| 1732270694 | -32 dbm | 0.02 V | 0 | 0 | 0 |
| 1732267094 | -31 dbm | 0.02 V | 0 | 0 | 0 |
| 1732266494 | -30 dbm | 0.02 V | 0 | 0 | 0 |
| 1732264094 | -28 dbm | 0.02 V | 0 | 0 | 0 |
| 1732263494 | -29 dbm | 0.02 V | 0 | 0 | 0 |
| 1732259894 | -27 dbm | 0.02 V | 0 | 0 | 0 |
| 1732259293 | -31 dbm | 0.02 V | 0 | 0 | 0 |
| 1732255094 | -28 dbm | 0.02 V | 0 | 0 | 0 |
| 1732254493 | -28 dbm | 0.02 V | 0 | 0 | 0 |
| 1732250893 | -31 dbm | 0.02 V | 0 | 0 | 0 |
| 1732247894 | -29 dbm | 0.02 V | 0 | 0 | 0 |
| 1732239496 | -30 dbm | 0.02 V | 0 | 0 | 0 |
| 1732236494 | -28 dbm | 0.02 V | 0 | 0 | 0 |
| 1732231695 | -29 dbm | 0.02 V | 0 | 0 | 0 |
| 1732226896 | -30 dbm | 0.02 V | 0 | 0 | 0 |
| 1732222696 | -30 dbm | 0.02 V | 0 | 0 | 0 |
| 1732222094 | -32 dbm | 0.02 V | 0 | 0 | 0 |
| 1732217894 | -29 dbm | 0.02 V | 0 | 0 | 0 |
| 1732217294 | -29 dbm | 0.02 V | 0 | 0 | 0 |
| 1732207693 | -28 dbm | 0.02 V | 0 | 0 | 0 |
| 1732189695 | -26 dbm | 0.02 V | 0 | 0 | 0 |
| 1732185494 | -26 dbm | 0.02 V | 0 | 0 | 0 |
| 1732179494 | -28 dbm | 0.02 V | 0 | 0 | 0 |
| 1732176494 | -28 dbm | 0.02 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)