APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

9A2RI-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A2RI-11. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732259466	14.38 Volt	800 Pkt	240 Pkt	81 Pcnt
1732258565	14.3 Volt	770 Pkt	240 Pkt	80 Pcnt
1732257667	14.3 Volt	780 Pkt	240 Pkt	82 Pcnt
1732256764	14.38 Volt	760 Pkt	240 Pkt	81 Pcnt
1732255863	14.38 Volt	750 Pkt	240 Pkt	82 Pcnt
1732254962	14.3 Volt	780 Pkt	230 Pkt	83 Pcnt
1732254061	14.3 Volt	760 Pkt	230 Pkt	83 Pcnt
1732253162	14.3 Volt	730 Pkt	210 Pkt	81 Pcnt
1732252259	14.3 Volt	730 Pkt	220 Pkt	81 Pcnt
1732251358	14.3 Volt	710 Pkt	230 Pkt	79 Pcnt
1732250457	14.3 Volt	710 Pkt	230 Pkt	78 Pcnt
1732249556	14.3 Volt	740 Pkt	230 Pkt	79 Pcnt
1732248656	14.3 Volt	760 Pkt	230 Pkt	78 Pcnt
1732247755	14.38 Volt	760 Pkt	230 Pkt	79 Pcnt
1732246854	14.38 Volt	750 Pkt	220 Pkt	80 Pcnt
1732245954	14.38 Volt	750 Pkt	240 Pkt	79 Pcnt
1732245052	14.3 Volt	770 Pkt	250 Pkt	78 Pcnt
1732244151	14.3 Volt	830 Pkt	260 Pkt	79 Pcnt
1732243250	14.3 Volt	890 Pkt	270 Pkt	79 Pcnt
1732242350	14.38 Volt	950 Pkt	260 Pkt	81 Pcnt
1732241449	14.3 Volt	970 Pkt	260 Pkt	82 Pcnt
1732240548	14.3 Volt	960 Pkt	260 Pkt	82 Pcnt
1732239647	14.3 Volt	950 Pkt	250 Pkt	82 Pcnt
1732238981	14.3 Volt	980 Pkt	250 Pkt	83 Pcnt
1732238746	14.3 Volt	960 Pkt	240 Pkt	82 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)