APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

TA3Q-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3Q-11. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732242389	54 Pkt	19 Pkt	-84 dBm	11.85 V
1732241779	56 Pkt	29 Pkt	-84 dBm	11.96 V
1732241169	52 Pkt	25 Pkt	-85 dBm	11.83 V
1732240559	58 Pkt	32 Pkt	-85 dBm	11.94 V
1732239949	54 Pkt	23 Pkt	-86 dBm	11.85 V
1732239339	52 Pkt	28 Pkt	-82 dBm	11.85 V
1732238729	53 Pkt	36 Pkt	-85 dBm	11.94 V
1732238119	50 Pkt	34 Pkt	-85 dBm	11.96 V
1732237509	51 Pkt	22 Pkt	-83 dBm	11.96 V
1732236899	53 Pkt	32 Pkt	-84 dBm	11.83 V
1732236289	52 Pkt	19 Pkt	-83 dBm	11.94 V
1732235679	51 Pkt	31 Pkt	-83 dBm	11.83 V
1732235144	54 Pkt	25 Pkt	-85 dBm	11.83 V
1732234460	50 Pkt	21 Pkt	-83 dBm	11.83 V
1732233849	51 Pkt	32 Pkt	-84 dBm	11.83 V
1732233239	53 Pkt	29 Pkt	-85 dBm	11.94 V
1732232629	57 Pkt	19 Pkt	-86 dBm	11.83 V
1732232019	58 Pkt	36 Pkt	-82 dBm	11.83 V
1732231409	52 Pkt	26 Pkt	-85 dBm	11.83 V
1732230799	51 Pkt	20 Pkt	-86 dBm	11.83 V
1732230189	52 Pkt	41 Pkt	-85 dBm	11.94 V
1732229579	58 Pkt	22 Pkt	-87 dBm	11.83 V
1732228969	54 Pkt	23 Pkt	-86 dBm	11.83 V
1732228359	53 Pkt	38 Pkt	-84 dBm	11.85 V
1732227749	59 Pkt	25 Pkt	-84 dBm	11.83 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)