APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

SR8RJS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8RJS. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10min*	Rx1h*	EfTot*
1732241280	14.3 Volt	30 Pkt	0 Pkt	66 Pcnt
1732240076	14.3 Volt	40 Pkt	30 Pkt	45 Pcnt
1732239176	14.3 Volt	50 Pkt	40 Pkt	46 Pcnt
1732238276	14.3 Volt	30 Pkt	30 Pkt	45 Pcnt
1732236476	14.3 Volt	70 Pkt	40 Pkt	45 Pcnt
1732235576	14.3 Volt	80 Pkt	40 Pkt	45 Pcnt
1732234676	14.3 Volt	80 Pkt	50 Pkt	45 Pcnt
1732233776	14.3 Volt	90 Pkt	50 Pkt	45 Pcnt
1732232877	14.3 Volt	80 Pkt	50 Pkt	45 Pcnt
1732231977	14.3 Volt	90 Pkt	50 Pkt	44 Pcnt
1732231077	14.3 Volt	70 Pkt	50 Pkt	45 Pcnt
1732230177	14.3 Volt	80 Pkt	50 Pkt	44 Pcnt
1732229277	14.3 Volt	90 Pkt	50 Pkt	45 Pcnt
1732228377	14.3 Volt	90 Pkt	50 Pkt	45 Pcnt
1732227477	14.3 Volt	80 Pkt	60 Pkt	45 Pcnt
1732226577	14.3 Volt	90 Pkt	60 Pkt	45 Pcnt
1732225677	14.3 Volt	90 Pkt	50 Pkt	46 Pcnt
1732224777	14.3 Volt	150 Pkt	50 Pkt	46 Pcnt
1732223877	14.3 Volt	70 Pkt	40 Pkt	47 Pcnt
1732222977	14.3 Volt	80 Pkt	40 Pkt	48 Pcnt
1732222077	14.3 Volt	100 Pkt	40 Pkt	49 Pcnt
1732221177	14.3 Volt	60 Pkt	40 Pkt	49 Pcnt
1732220279	14.3 Volt	60 Pkt	40 Pkt	50 Pcnt
1732219379	14.3 Volt	100 Pkt	50 Pkt	51 Pcnt
1732218477	14.3 Volt	80 Pkt	60 Pkt	52 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx10min: 0, 10, 0

Rx1h: 0, 10, 0

DIG10m: 0, 1, 0

EfTot: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)