APRS.ro MAP

Reset

reset

DB0PIB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0PIB. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vfm*	Vbuf*	Isol*	Ievs*	Tbat*
1737202182	13.3 V	13.3 V	5.08 A	0 A	5.5 C
1737201888	13.3 V	13.3 V	5.27 A	0 A	5.5 C
1737201882	13.3 V	13.3 V	5.27 A	0 A	5.5 C
1737201582	13.4 V	13.4 V	7.03 A	0 A	5.5 C
1737201283	13.1 V	13.3 V	7.23 A	0 A	5.5 C
1737201282	13.1 V	13.3 V	7.23 A	0 A	5.5 C
1737200982	13.3 V	13.3 V	6.25 A	0 A	5 C
1737200709	13.3 V	13.3 V	5.66 A	0 A	5 C
1737200682	13.3 V	13.3 V	5.66 A	0 A	5 C
1737200382	13.4 V	13.4 V	7.23 A	0 A	5 C
1737200084	13.5 V	13.5 V	8.79 A	0 A	5 C
1737200082	13.5 V	13.5 V	8.79 A	0 A	5 C
1737199782	13.6 V	13.6 V	11.52 A	-0.2 A	5 C
1737199522	13.6 V	13.5 V	11.52 A	-0.2 A	5 C
1737199482	13.6 V	13.5 V	11.52 A	-0.2 A	5 C
1737199182	13.4 V	13.4 V	10.74 A	0 A	5 C
1737198883	12.8 V	13 V	7.03 A	0 A	5.5 C
1737198882	12.8 V	13 V	7.03 A	0 A	5.5 C
1737198582	12.9 V	12.9 V	3.52 A	0 A	5.5 C
1737198294	12.9 V	12.9 V	3.32 A	0 A	5.5 C
1737198282	12.9 V	12.9 V	3.32 A	0 A	5.5 C
1737197982	12.8 V	12.9 V	2.93 A	0 A	5.5 C
1737197720	12.8 V	12.9 V	2.73 A	0 A	5.5 C
1737197682	12.8 V	12.9 V	2.73 A	0 A	5.5 C
1737197382	12.9 V	12.9 V	3.12 A	0 A	5.5 C

*Used Equation Coefficients:

Vfm: 0, 0.1, 0

Vbuf: 0, 0.1, 0

Isol: 0, 0.1953, -24.8031

Ievs: 0, 0.1953, -24.8031

Tbat: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)