This is the latest recevied telemetry packets stored in our database for station/object MB7UKB-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU* | Used* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732264599 | 36.47 C | 205 MB | 0 | 0 | 0 |
| 1732262798 | 36.47 C | 205 MB | 0 | 0 | 0 |
| 1732260998 | 36.47 C | 202 MB | 0 | 0 | 0 |
| 1732259199 | 36.47 C | 205 MB | 0 | 0 | 0 |
| 1732257399 | 36.47 C | 203 MB | 0 | 0 | 0 |
| 1732255598 | 36.47 C | 204 MB | 0 | 0 | 0 |
| 1732253798 | 36.47 C | 204 MB | 0 | 0 | 0 |
| 1732251999 | 36.47 C | 203 MB | 0 | 0 | 0 |
| 1732250199 | 36.47 C | 205 MB | 0 | 0 | 0 |
| 1732248398 | 36.47 C | 202 MB | 0 | 0 | 0 |
| 1732246599 | 36.47 C | 203 MB | 0 | 0 | 0 |
| 1732244799 | 37.01 C | 204 MB | 0 | 0 | 0 |
| 1732242999 | 36.47 C | 203 MB | 0 | 0 | 0 |
| 1732241198 | 36.47 C | 205 MB | 0 | 0 | 0 |
| 1732239399 | 36.47 C | 206 MB | 0 | 0 | 0 |
| 1732237599 | 37.55 C | 204 MB | 0 | 0 | 0 |
| 1732235798 | 37.01 C | 205 MB | 0 | 0 | 0 |
| 1732233998 | 36.47 C | 205 MB | 0 | 0 | 0 |
| 1732232199 | 36.47 C | 204 MB | 0 | 0 | 0 |
| 1732230399 | 37.55 C | 224 MB | 0 | 0 | 0 |
| 1732228598 | 37.01 C | 204 MB | 0 | 0 | 0 |
| 1732226798 | 37.55 C | 204 MB | 0 | 0 | 0 |
| 1732224999 | 36.47 C | 201 MB | 0 | 0 | 0 |
| 1732223199 | 37.55 C | 203 MB | 0 | 0 | 0 |
| 1732221398 | 38.09 C | 204 MB | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU: 0, 0.01, 0
Used: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)