This is the latest recevied telemetry packets stored in our database for station/object DJ5RQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732228967 | 0.3 deg C | 88.4 % | 994.2 hPa | 0 | 0 |
| 1732228631 | 0.3 deg C | 87.8 % | 994.1 hPa | 0 | 0 |
| 1732227731 | 0.4 deg C | 86.6 % | 994 hPa | 0 | 0 |
| 1732226831 | 0.5 deg C | 86.1 % | 993.9 hPa | 0 | 0 |
| 1732225931 | 0.4 deg C | 87.1 % | 993.9 hPa | 0 | 0 |
| 1732225031 | 0.4 deg C | 86.3 % | 994 hPa | 0 | 0 |
| 1732224131 | 0.6 deg C | 85.5 % | 994.1 hPa | 0 | 0 |
| 1732223230 | 0.7 deg C | 84.4 % | 993.9 hPa | 0 | 0 |
| 1732222330 | 0.7 deg C | 84.5 % | 994 hPa | 0 | 0 |
| 1732221430 | 0.7 deg C | 84.7 % | 994 hPa | 0 | 0 |
| 1732220530 | 0.6 deg C | 85.6 % | 993.8 hPa | 0 | 0 |
| 1732219630 | 0.6 deg C | 85.8 % | 993.5 hPa | 0 | 0 |
| 1732218730 | 0.7 deg C | 85.1 % | 993.6 hPa | 0 | 0 |
| 1732217830 | 0.7 deg C | 83.5 % | 993.7 hPa | 0 | 0 |
| 1732216930 | 0.8 deg C | 80.2 % | 993.7 hPa | 0 | 0 |
| 1732216585 | 0.5 deg C | 80.9 % | 993.6 hPa | 0 | 0 |
| 1732215685 | 0.3 deg C | 86.6 % | 993.9 hPa | 0 | 0 |
| 1732214785 | 0.3 deg C | 86.7 % | 994.3 hPa | 0 | 0 |
| 1732213885 | 0.2 deg C | 87.5 % | 994 hPa | 0 | 0 |
| 1732212985 | 0.3 deg C | 86.8 % | 994.6 hPa | 0 | 0 |
| 1732212085 | 0.3 deg C | 87.1 % | 994.4 hPa | 0 | 0 |
| 1732211185 | 0.4 deg C | 86.6 % | 994.6 hPa | 0 | 0 |
| 1732210285 | 0.3 deg C | 86.4 % | 995.1 hPa | 0 | 0 |
| 1732209385 | 0.2 deg C | 87.8 % | 995.5 hPa | 0 | 0 |
| 1732208485 | 0.3 deg C | 87.2 % | 995.7 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)