This is the latest recevied telemetry packets stored in our database for station/object IR3ZW. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | ARDUINO* | BATTERIA* | Value3* | Value4* | TEMPERATURA* |
|---|---|---|---|---|---|
| 1732260895 | 5 Volt | 13.2 Volt | -10.6 | 0 | 1.5 °C |
| 1732260283 | 5 Volt | 13.2 Volt | -10.5 | 0 | 1.75 °C |
| 1732259683 | 5 Volt | 13.2 Volt | -10.6 | 0 | 1.75 °C |
| 1732259070 | 5 Volt | 13.2 Volt | -10.5 | 0 | 2.25 °C |
| 1732258470 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.5 °C |
| 1732257858 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.25 °C |
| 1732257258 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.25 °C |
| 1732256645 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.5 °C |
| 1732256045 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.5 °C |
| 1732255433 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.5 °C |
| 1732254833 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.75 °C |
| 1732254221 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.5 °C |
| 1732253620 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.5 °C |
| 1732253008 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.5 °C |
| 1732252408 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.5 °C |
| 1732251796 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.25 °C |
| 1732251196 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2 °C |
| 1732250583 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2 °C |
| 1732249983 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2.25 °C |
| 1732249371 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2 °C |
| 1732248770 | 5 Volt | 13.6 Volt | -10.4 | 0 | 1.75 °C |
| 1732248158 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2 °C |
| 1732247558 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2 °C |
| 1732246944 | 5 Volt | 13.6 Volt | -10.4 | 0 | 2 °C |
| 1732246344 | 5 Volt | 13.6 Volt | -10.4 | 0 | 1.75 °C |
*Used Equation Coefficients:
ARDUINO: 0, 0.1, 0
BATTERIA: 0, 0.2, 0
Value3: 0, 0.1, -17.1
Value4: 0, 0.2, 0
TEMPERATURA: 0, 0.25, -20.5
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)