APRS.ro MAP

APRS.ro MAP About ☰ --:--:--

Reset

reset

TA2IK-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA2IK-11. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732272453	112 Pkt	36 Pkt	2 Pkt	-60 dBm	0.08 V
1732271527	7 Pkt	0 Pkt	1 Pkt	-59 dBm	0.08 V
1732271008	111 Pkt	44 Pkt	0 Pkt	-60 dBm	0.08 V
1732270081	105 Pkt	62 Pkt	1 Pkt	-61 dBm	0.08 V
1732269160	73 Pkt	54 Pkt	1 Pkt	-60 dBm	0.08 V
1732268238	60 Pkt	69 Pkt	1 Pkt	-61 dBm	0.08 V
1732267315	88 Pkt	42 Pkt	5 Pkt	-61 dBm	0.08 V
1732266390	80 Pkt	41 Pkt	0 Pkt	-60 dBm	0.08 V
1732265469	74 Pkt	38 Pkt	5 Pkt	-60 dBm	0.08 V
1732264548	88 Pkt	36 Pkt	8 Pkt	-61 dBm	0.08 V
1732263625	80 Pkt	40 Pkt	6 Pkt	-61 dBm	0.08 V
1732262702	105 Pkt	29 Pkt	14 Pkt	-61 dBm	0.08 V
1732261777	15 Pkt	1 Pkt	2 Pkt	-61 dBm	0.08 V
1732260880	76 Pkt	22 Pkt	19 Pkt	-60 dBm	0.08 V
1732259959	109 Pkt	27 Pkt	16 Pkt	-60 dBm	0.08 V
1732259032	114 Pkt	24 Pkt	18 Pkt	-61 dBm	0.08 V
1732258105	119 Pkt	26 Pkt	12 Pkt	-61 dBm	0.08 V
1732257182	99 Pkt	25 Pkt	12 Pkt	-60 dBm	0.08 V
1732256258	104 Pkt	24 Pkt	18 Pkt	-61 dBm	0.08 V
1732255333	73 Pkt	18 Pkt	23 Pkt	-60 dBm	0.08 V
1732254412	2 Pkt	0 Pkt	5 Pkt	-61 dBm	0.08 V
1732253674	70 Pkt	21 Pkt	15 Pkt	-62 dBm	0.08 V
1732252752	89 Pkt	12 Pkt	25 Pkt	-61 dBm	0.08 V
1732250833	9 Pkt	0 Pkt	1 Pkt	-60 dBm	0.08 V
1732249983	79 Pkt	43 Pkt	3 Pkt	-61 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)