This is the latest recevied telemetry packets stored in our database for station/object 2E0TOY. If no packets are shown the sender has not sent any telemetry packets the latest 2 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Rx10m* | Eff* | Eff1h* |
|---|---|---|---|---|---|
| 1732289361 | 15.08 V | 10 pkt | 3 pkt | 40 % | 33 % |
| 1732288761 | 15.08 V | 10 pkt | 3 pkt | 40 % | 40 % |
| 1732288161 | 15.08 V | 10 pkt | 4 pkt | 40 % | 48 % |
| 1732287561 | 15.08 V | 10 pkt | 2 pkt | 40 % | 48 % |
| 1732286961 | 15.08 V | 10 pkt | 4 pkt | 40 % | 48 % |
| 1732286361 | 15.08 V | 10 pkt | 2 pkt | 40 % | 54 % |
| 1732285761 | 15.08 V | 10 pkt | 3 pkt | 40 % | 54 % |
| 1732285161 | 15.08 V | 20 pkt | 4 pkt | 40 % | 54 % |
| 1732284561 | 15.08 V | 10 pkt | 3 pkt | 40 % | 51 % |
| 1732283962 | 15.08 V | 10 pkt | 2 pkt | 40 % | 43 % |
| 1732283361 | 15.08 V | 10 pkt | 5 pkt | 40 % | 41 % |
| 1732282762 | 15.08 V | 10 pkt | 2 pkt | 40 % | 36 % |
| 1732282162 | 15.08 V | 10 pkt | 3 pkt | 40 % | 35 % |
| 1732281562 | 15.08 V | 10 pkt | 2 pkt | 40 % | 40 % |
| 1732280962 | 15.08 V | 10 pkt | 3 pkt | 40 % | 41 % |
| 1732280362 | 15.08 V | 10 pkt | 2 pkt | 40 % | 45 % |
| 1732279762 | 15.08 V | 10 pkt | 3 pkt | 40 % | 51 % |
| 1732279162 | 15.08 V | 10 pkt | 1 pkt | 40 % | 65 % |
| 1732278562 | 15.08 V | 10 pkt | 3 pkt | 40 % | 52 % |
| 1732277962 | 15.08 V | 10 pkt | 3 pkt | 40 % | 46 % |
| 1732277362 | 15.08 V | 10 pkt | 3 pkt | 40 % | 47 % |
| 1732276762 | 15.08 V | 10 pkt | 2 pkt | 40 % | 45 % |
| 1732276162 | 15.08 V | 20 pkt | 5 pkt | 40 % | 53 % |
| 1732275562 | 15.08 V | 30 pkt | 2 pkt | 40 % | 50 % |
| 1732274962 | 15.08 V | 30 pkt | 2 pkt | 40 % | 56 % |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Rx10m: 0, 1, 0
Eff: 0, 1, 0
Eff1h: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)